Portable Laptop Notebook Rolling Table Cart Stand Tiltable Tabletop Desk Overbed

Arrived in only 5 days! I thought the pipe that supports the platforms was too short and emailed the company. I received a reply within 5 minutes, they asked for a photo, I sent that. They told me I put the larger platform on the wrong way - 180 degree turn and it was perfect. This is much nicer than the similar table I had before. Seems to be a more study construction, It even came with a small wrench and screwdriver in the kit! I like the high gloss finish. I like the pivot feature, but it would need a counter weight or it tips over with my laptop on it when pivoted away from base. Seems like I can pivot it about 30 degrees and it does not tip over, which seems to be enough for me to reach it from my couch. The rollers are smaller than my previous table so it would go under most furniture. Unfortunately I have a sofa bed so I will need to remove the rollers. The roller screws come completely out so that will be good, but I would need to cut the screws holding the upright base shorter if I removed the rollers since they stick out at least 1/2 inch from bottom. I am thinking of leaving the "guard rails" off. Laptop seems to stay on surface with a small decline without sliding off, and I can put the laptop on a 45 degree angle at the corner and this helps me reach it and still leave the rollers on. I think I will try to use it like this a while and see if I really need to remove the rollers. I like how the table base has 2 spots to adjust the angle and tighten the setting, my old table was very floppy and loose. This one seems just right! I am very pleased with the product and with the prompt reply to my problem. UPDATE - It is now May of 2017 and I am still pleased with the table. It is perfect for my needs. I left off the top lip part so mine is smooth all the way across. I don't tilt the table so I don't need it, and I can have the laptop at any angle this way.

I ordered a massive amount of items to start a small business from my home. I ordered the computer desk as I thought it would be perfect for putting my second sewing machine one and have the ability to tuck it away when not in use. I didn't realize that this table is not stable enough to hold anything over ten pounds or less. The large table top and the side table can both be tilted, unfortunately there is no way to keep them from tilting and dropping whatever is on the table (if it is over 10 pounds or so It's base design is very unstable also and it doesn't matter what the weight is, it has a tendency to tip because of the "T" shape of the bottom section. The other problem is that once you have the metal square 'tube' which is attached to the table top) inserted (takes lots of strenght and mean words) into the larger opening in the bottom square opening, you can't move it. I tried WD-40 etc. I finally had to turn it upside down and pull the pieces apart. Then the hard plastic enclosing the 'tube' that fits into the bottom and needs to fit into the larger hole, will not move. At that point I gave up because I was afraid I got my hammer out to encourage the plastic to move I might get carried away. I am very very disappointed in this table. I thought there would be a way to lock the table horizontally so there was no chance of tipping. I perfectly centered my sewing machine after the first time it hit the floor, but it still managed to smash to the floor one more time. It is a very nice looking piece, but I wish I had purchased something sturdier and with more information about what weights it could hold and if it could be locked into a horizontal position. I haven't yet tried my machine to see if it works, but at least it wasn't the new one.

I agree with other reviewers that the assembly was easy. I thought it was kinda cool that the company includes a small philips screwdriver. One of the screws was defective, but there were extras, so no problem. Once I got it set up, I noticed there was too much play in the mouse platform, but all I needed to do was tighten up the two knobs under it. I bought this stand to make my "work station" more ergonomic. I love how multiply adjustible it is and that I can finally raise my laptop high enough so my screen is at eye level. If your stand becomes wobbly, keep in mind that as you roll this thing around, the vibration will loosen the nuts underneath, so you might have to snug everything up periodically. Attractive, sturdy, inexpensive—everything I wanted in a computer stand.

I've had a many different laptop tables. THIS IS THE WORST I HAVE EVER USED. It shakes constantly, leans lower on the left side, doesn't stay at the angle you put it at and leans forward easily so I was always afraid my laptop would fall off of it. I needed a larger laptop table because I bought a larger laptop. I wanted it steady one at a taller height. I should have paid better attention to the reviews. I set it up too late to return so I donated it to charity. It might have been steadier at a lower height but I wanted mine at countertop height because I use it in my kitchen and my TV's on the frig so because the TV is high I need the table to be higher than average.

I knew I would need a laptop table before I came down to Texas to help out at our international mission office. Because of the muscle disease I have, I need to sit in a soft recliner and do my computer work on a rolling laptop table that can come over top of my legs. This little table is just perfect. I was able to put it together myself in about 40 minutes, it is adjustable both for height as well as the angle of the table top. I can easily roll it over me and do my work and stay connected with friends and family around the world through the internet. If I end up needing a second laptop table, I will most certainly come back to order a second one just like this one. Thanks Amaazon for making my life and work so much better.

This item needs your loving care, and attention to detail as you follow the directions for assembly. It is not bad directions, or difficult to follow, the parts list break down has no extra parts, but gives you the tools to do the task. The parts are high quality parts, as well as high quality lists and diagrams. It's engineered to a degree that the holes line up exactly, the right length and size/thread of each nut and bolt is what is needed for correct assembly. The top platform has rounded corners for the two piece combination top. This allows both safety and more precise fitting of the two piece table top upon completion. For the price it is a good rolling computer table, with swing, tilt, and adjustable height. It has a quad wheel base engineered to be low enough to slide under beds and couches as well as other furniture. The table's working surface has guides along the length of the larger sides of the main table surface to preclude the slipping off of the laptop computers, writing utensils and such.The smaller Table surface, (the mouse platform) can be leveled to prevent the mouse from following gravitational directions. Table surface can be tilted and locked to various positions to improve keyboard visibility. There is only one thing the Cart does not have, drink holders. (Said in Jest) Electricity and liquids do not make good companions. The support system for the cart is rugged and flexible, can be a little tough on hands due to being tightened too much. but supports rising height of the working surface. There is a suggestion for the next model, run some cord channels from the long edge of table surface to assist placement of the spider webs of a lot of devices. Sincerely, Bruce Puckett

the two clamps under the small side were broken..they were cracked..i tryed to fix them but i think i'll need to go buy 2 more..if i can find them..

I like it, but it isn't tall enough to use where I needed it after surgery across my bed (with me in it). My husband had to buy a pole to insert inside the tube so it could sit higher. It's not perfect, but overall it works. It looks nice, and tilts easily. I also bought a plastic mat so that it would slide more easily than on the carpet. I think people would find it works well in most situations.