VADANIA 20" Heavy Duty Drawer Slide with Lock #VD2053, 2" Width Up to 250lb Load Capacity, 3-Fold Full Extension, Ball Bearing Lock-in & Lock-Out, Side Mount, 1-Pair

These worked great for my purpose - a sliding shelf to mount a (heavy!) generator in an offroad trailer.Word of advice though - take special care when assembling your final product. I test fit mine and it worked flawlessly, then I had to break it all down for painting. During reassembly I accidentally swapped the outer rails around, much to my regret. (I didn't realize that they actually had a certain orientation they needed to be.) When sliding the shelf back in it wouldn't insert into the outer rails, and like a dope I forced it a little harder than I should have resulting in me having to force it back out again to see what the problem was. In the process I dislodged a pin mechanism in one of the inner rails. (Thankfully I saw the pin fall and didn't lose it.) The end result was me having to break it all down and reverse/flip the outer rails and then re-fit the pin into the inner rail. (Which wasn't very hard, but I was lucky because it could have broken.)So long story short, watch your slide orientation before final assembly. The finished product works like expected and is very solid/sturdy, locking in both the closed and extended positions.

Heavy duty, used to make a wall sliding gate for top of stairs. Holds up to 5 kids and dog hanging on it. The lock is nice so I can lock gate open or shut. Slides smooth. I wouldn’t hesitate to use in a high weight drawer.

Purpose: bought 48" (blue lock levers) for cargo slide in camper van conversion. So I was very hesitant to purchase, even though I had little choice because I wanted a tray slide, because of all the negative reviews about poor packaging. Well, I think Vandania read them too.Slides arrived on time, kudos to the shipper, intact and functional. In fact, the 2" tall slides were double boxed. The slides were boxed in a very securely sealed 2.25 x 2.75 heavy duty box with the lock mechanism end of the slides further protected from damage with a plastic cap. This box was in turn packaged in a 7x10 outer box.As for the slides, they do, and well. This brad does not offer mounting hardware like the other guys which I'm fine with. Mounting is specialized on a case by case basis; one screw does not fit all.What I find interesting though is that the Brand reps, in response to Amazon questions about mounting and locking, suggest the slides be oriented such that to unlock them one must lift up on the lever; something about how the latch mechanism is designed. In my case however, the slides I received are stamped L and R and if followed that placement, I would be pressing down to unlock. I agree with the Brand, the design of the lock mechanism favors lift-up to unlock so I'll be putting the R on the L and the L on the R. Besides, I don't have the clearance to push down to unlock in the closed position.

Super high quality slides, they lock out and close smoothly without fighting like some other brands I have had in the past. I’m using these on a diy drawer system in the back of my 4Runner, no complaints so far, happy customer!

After watching WAY too many YouTube videos of guys building drawers in their trucks and vans, I decided to give it a go myself. I now have been using my drawers for the last 6 months. These drawer slides have been great. I wouldn’t say that I load them up to capacity, but with the loads I am putting on them they are working well. I also really like the lock in/out aspect. They were easy to install, I recommend cutting some wood blocks to size to help hold them up while screwing them in. So far, very happy with the outcome.

I was skeptical but I'm actually impressed, these really are the heavy duty industrial drawer slides they claim to be. I have a recording and editing desk and needed drawer slides strong enough to hold up a midi controller that weighs around 75 lbs plus the slab of wood underneath. This is actually my 3rd pair of drawer slides because it's the best I could find for the price, but they were terrible! I included a photo of the Home Depot pair I replaced, avoid these if you need to support something with weight.I was debating between the Vadania drawer slides and a slightly cheaper set and boy am I glad I went with these. The drawer slides handle the weight with ease and the midi tray actually glides now!I will say I am having a little trouble getting one side to lock on the in position which I will admit could very well be user error from how I put the desk together :) I really don't care enough to find out because the other side locks so it isn't noticeable.They are a little frustrating to line up but all drawer slides are and these at least lock so they don't keep popping out like cheap kind.I'll report back if anything changes but so stoked so far and very happy with these!

Good product

This was a terrible experience through and through. First, I needed them for a time sensitive project, and the package was delayed TWICE, which resulted in me receiving them 5 days later than what was guaranteed.Then, the package itself was torn - the slides were falling out of the ends, getting scratched up.Once I tried to install the slides - I realized one of them was bent at the end, and the inner slide kept popping out of the track.On paper, the product is nice. It's made out of sturdy metal and other heavy duty materials. The right slight was functioning well. But man, this was discouraging. I cannot recommend this product to anyone - this does not seem like a trustworthy company.