HT206D Digital Clamp Meter T-RMS 6000 Counts, Multimeter Voltage Tester Auto-ranging, Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle (AC/DC Current)

Great find. It just plain works. Being able to measure both AC & DC current is a real plus.

I have a couple of these. The price is right and they work great

I needed a clamp on meter capable of DC amps anywhere in the vicinity of 0.5 a to 50 amps. While I found in the advertisement that the meter had a 60 amp and a 600 amp scale, nowhere on Amazon could I find the minimum amperage this meter could detect ( ie, would it even indicate 0.5 amps). I bought it on the hope that it would. On the 60 amp scale, the device displays two decimals, so in theory a current of 0.01 amp could be detected. I would not however buy it to read this low of a current, as I would be highly suspect of the accuracy at this low level. I would say the very lowest dc current this can reliably detect is 0.1 amp or 100 madc. Decent meter. I wouldn’t consider it “standards” grade, but a lot of features for home owner use.

This Kaiweets HT206D clamp multimeter is great - I love it. For $48 it is a best buy. {{It competes well with my several hundred dollars Fluke multimeter. My biggest issue with Fluke is their probes are outrageously priced, but their meters are excellent.}} I have tested all functions, and it works very well. The clamping ammeter is a real plus. This is now my go-to meter for everyday projects. I like the fact that it uses two AAA batteries. I hate rechargeable anything and avoid them like the plague they are –always discharged when you need them most and you need to wait to recharge them. Not this meter – just slip in two new AAA batteries and you are good to go. Half the leads (mainly the fine pointed ones) that come with the meter, however, are crap and so is the optional Kaiweets 23-piece multimeter test lead kit. These have connectivity issues with either high ohms or ohms that continuously jump all over the place. They are held in place via a crimp and the conductivity is awful. The Kaiweets vendor replaced the 23-piece kit for me, but the replacement had the same conductivity issues. Save yourself time and aggravation, get a good lead set for this. I wasted a few weeks thinking the meter was bad when it was bad probes. These are the probes I ultimately settled on as excellent for this Kaiweets clamping multimeter: the Snakol 22-Piece Multimeter Test Lead Kit and the Bionso 25-Piece Multimeter Leads Kit - both at about the same price as the malfunctioning Kaiweets test probe kit. The main difference is the Snakol has longer probe handles which I like. I am using both sets, however. All the probes in these two sets have great conductivity and no issues and they fit the Kaiweets HT206D clamp multimeter. They give stable readings of 0-to-0.1-ohms. The main issue with these, however, is the probes need to be screwed into place with a wrench or needle nose pliers making changing probes more difficult. On the other hand, this is likely why they give such good conductivity. However, you can buy multiple sets so you can permanently set up the probes you use most frequently. Some of the other probes in the set are the plug-in type so they be changed easily and these have excellent conductivity as well. I find these two kits give me all the probes I need and more.

Great meter, I've used every function and they all work perfectly. I use this to troubleshoot issues in large equipment electrical cabinets.

Its really a good tool to have easy to use

My husband liked this one as much as he did h8s $300 meter. Quality and a great price.

Item functions as designed. For being an after-market product, this meter is quite accurate. I’ve struggled with accurate inductive meters and was referred to this one and is living up to what it was sold to be. The display is very bright when needed, and very bold. Easy to read and understand. Only gripe that I have is, when reading a test results, the reading stands to fluctuate? Possible meter issue? Or circuits I am measuring? Not so sure, nevertheless does what is needed.

Stämmer i mätvärden på spänning o ström mätning. Bra pris.

Funktioniert tadellos. Mit einem Tastendruck einfaches Umschalten von Wechselstrom auf Gleichstrom und zurück.

Excellent product Excellent service arrived in 2 days of purchase

納期早い（中国からの輸入モノは、このご時世の影響か、中国通関通れず届かなかった）。梱包もきれい。日本語がある取説もうれしい。ループ式での直流電流計測は、ゼロリセットができて、10mAの桁でばらつき、誤差ありますが、100mA の桁で判断すれば問題を感じません。本来、非接触直流電流計測機能だけでも私には価値があります。付属の熱電対で温度も℃で計れます。液晶のバックライトとループ部を照らすライトは超便利。その他機能は、これからですが。今後の耐久性に期待しています。

I have mostly Fluke multi-meters, my oldest and the one I still use most is over 35 years old and still works perfectly. Before I retired I could justify £350 plus for each of these and they have paid for themselves many times over. But now when I needed an amp-clamp to check the integrity of glow plug circuits on my motor-home I had the choice of another new Fluke, to get a auto electrician in, or to buy this meter. Two of these options were very expensive one was not. Guess which one I chose. The manufacturing quality of this meter is not great but the cost was so low that had it only lasted one job it would have been worth it, although I do not as rule advocate buying to throw away. Actually I have used it a lot, partly because its small size makes it easy to get the amp clamp in small spaces. It is nowhere near as substantial as a Fluke but its not a twentieth of the price. So there has to be compromises somewhere. The plastic is quite flimsy and I assume the electronic components are probably not grade 1. As someone who regularly used to drop his meters off buildings and into running engines I don't believe it would stand up to heavy usage simply because its not armoured in the same way. And again because of the thinner plastics I would be wary of using it on higher amperage's,. But so far not only has it worked but it has worked well. So if you do not need a professional grade instrument that actually requires significant investment then I have no reason not to recommend this item.