Wilton General Purpose Bench Vise, 5" Jaw Width, 4" Max Jaw Opening, 2-1/2" Throat (11105)

After reading the reviews of this vise, I decided to order it. I'm glad I did. This vise seems to be of great quality. I hope it'll last. I know people complain about the 3 mounting holes instead of 4, but the 3 holes allow you to swing the vise around if you need to. Also, to all the people out there that broke the thing and gave it 1 star, I ask why you were using a Sub-$100 vise in such a manner? If you need something that strong and durable, I'd imagine you'd spend the extra money for a stronger, more durable piece of equipment.

This vise has been an awesome addition to my woodworking bench. I have recently taken up the hobby of woodworking and I needed some sort of vise. This vise has turned out very well for most of my woodworking needs. It is bench mounted so it will be up in the air and no flush with the bench. For woodworking this isn't exactly optimal for all things but it gets me by for a lot of sawing and chiseling operations. This vise is also great for things like holding firearms for gunsmithing or holding other items for various hobbies. The 4 inch opening seems like more than enough for most things. The vise will also rotate which is useful for some things. Installation was very easy for me. I set the vise up where I wanted it on the work bench and used a pencil to mark the hole areas on the bench. I then drilled out the holes to match the diameter of the vise holes. I then installed the vise using 3 bolts, washers, and nuts I bought from home depot for a few dollars. It has stayed secured now for a few months no problem.I also bought these jaw covers in order to grip things like wood without deforming it as much: Lisle 48100 Vice Jaw PadJust remember, these pads will effectively lower the opening to under 4 inches.Pros:*Sturdy*Well machined for the price*Easy to installCons:*NoneAdditional Considerations:As I mentioned this vise is made to be mounted to the top of your workbench. So its not exactly optimal for all woodworking needs. It does great for a lot of things though. And it is especially good for things like holding firearms parts or other hobby tasks. If you want a nice woodworking vice you will probably want to check out a vise that is installed underneath the workbench and is level with the workbench. This allows more clamping operations on things. It also allows a more secure hold of something like a shooting board.Overall: 5/5 stars (>=.5 rounds up, <.5 rounds down) => 5 starsIf you have any further questions regarding the product in my review please leave a comment below and I will get back to you as soon as possible.

It's great I have needed a vise for and finally made the decision to get this one I love Wilton's and love the warranty so it should always be in my life from now on

I bought Wilton, because I have several of their American made vices, and they are excellent!This one is suitable, but it's made in China. And the craftsmanship is just not there.It is a nice light duty vice!

I received my vise. From previous reviews I expected it to be covered with grease. To my surprise it wasn't. The vise seems very sturdy. I had purchased three 3/8" steel all threaded bolts with washers nd wing nuts ahead of time for mounting. I ran my 3/8" drill bit through each hole because the holes were a little too tight to slide the bolts through. There was no problem doing this and the hexhead bolts fit perfectly. The vise was made in china but unlike a couple of reviews I read, the vise is not made of cheap steel. Keep in mind that this is a general purpose vise meant for light to medium work. It is not meant for constant heavy duty pounding. If you are the average homeowner like me, the vise should meet your needs. If you require a very heavy duty vise that requires heavy pounding I would recommend you spend the big bucks for a vise that meets your needs. For the average Joe like me, this vise is perfect. It has enough weight to stand alone for smaller jobs or to be mounted for larger jobs requiring more stability. I followed the advise from a previous reviewer and used wing nuts so I can mount and/or remove my vise easily. My vise did not come with a mounting template. That is no problem. Simply set the vise the way you want to mount it. Mark the holes with a sharp pencil and use a 3/8" drill bit to make your mounting holes. I highly recommend this vise if my review sounds like it fits your needs.

I have been using this vise regularly for the past 6 months and feel that I can now give an accurate review. Immediately upon building my workbench, I realized that the first addition needed was a bench vise. Realizing that I'm not a professional mechanic or tradesman, I wanted a smaller footprint and as high quality as I could find without spending too much money. Originally I was all set to get Grizzly's basic 4" bench vise. It has a large anvil face and has quite a bit of mass to it (almost twice the weight of the Wilton).I was just about to purchase the Grizzly when I discovered that Wilton had a buget-minded offering. The more I read, the more I was sold. I would have preferred 180 degrees of swivel, but the 120 degrees was much better than the Grizzly's 90 degree swivel. After 6 months of use, I can honestly say that the 120 degree swivel has not once been limited the effectiveness of this vise. Also, I REALLY liked the fact that the Wilton has a lifetime warranty. It's nice to know that a company with such quality products made in the USA still back up their low level imported products.Upon arrival, I unpackaged it, wiped it down, and mounted it to the front left corner of my workbench with three 3/8" lag bolts, which fit through the mount holes perfectly. It has performed flawlessly for all of the light and medium-duty tasks I've asked of it so far. I have yet to use it for anything truly heavy duty yet, and while I realize that this vise is not made for such tasks, I'll give it a shot when the time comes. I'll report back later.