X X-HOUSE Universal Garage Remote Control Multi Code Duplicator Remote,Face to Face Copy Garage Remote from 280Mhz-868Mhz,Control 4 Garage Door Opener,Ensure Your Model in Brand Table List

Very easy to program. Took me a min to program my gate and garage. It worked very good with the LiftMaster gate in my apartment. DID NOT need to program it on the gate machine. Whereas for my apartment garage, I had to press the learn button on my garage machine to make it work. Now I can use just one key for both my gate and garage :)

It worked great but lost power after two months

Ok first things first: YES, this remote works. 100%. BEFORE YOU BUY- check the info above for your gate/garage band. Its a must. Mine is a Liftmaster/ Chamberlain.Second: I am NOT a garage fella, so it took me longer than I wanted for this to work. The instructions are well thought out but still vague. I have the steps below, hope it helps.OK heres how you get this remote to work, step by step:STEP 1:First, get your old remote and this new one. Make sure the original has charged batteries.STEP 2:Its time to copy the signal from your old remote to your new one.PRO TIPS: Do this AWAY from your garage, hell maybe a parking lot up the street or further- just to make sure youre not opening and closing your garage nonstopSTEP 3:On the new remote: Hold the TOP RIGHT and BOTTOM LEFT button down, around 3 seconds. The light will flash once. NOW click the button you’d like to use, tap ONCE. You know you’ve done this right because the LED should now slowly flash.STEP 4 (FINAL STEP FOR SOME GATES/GARAGES):Grab the original remote and press it close to the new remote. The new remote’s LED will RAPIDLY FLASH. This means the signal has been copied. Success*!—Troubleshooting tips:So, you didnt get a flashing light. Here’s my tip for that; the instructions and some comments here say “keep the remote close”, or “turn it over”. But Ive found JUST one way to ensure my signal is copied.You keep your eye on the ORIGINAL remotes LED AND the new remotes LED. If your old remote led flashes, following with the NEW remote flashing, boom copied. If not, wait a moment and restart the process from that “cross press”.—STEP 5 “NEED TO ACTIVATE RECIEVER” BRANDS:-* ok heres where you MIGHT be done or you might not be done. Some gates are totally fine with the remote being copied and thats it.If you check the instructions and your brand says “Need to activate reciever”, then this means you just need to find the corresponding “learn” button on the gate receiver. For most liftmasters, its a purple button on the back of the lamp thingy. Make sure youre back in your garage for this step. Get up to the back of that thing, Now hold that button, AND the button you copied the signal to on your NEW remote.Once I did this, my garage opened, so this means that it WORKED.—OKAY. Hope this helps you.. I know its long, sorry. But I recently got one and was confused for a few days until I figured it out.. IT DOES work. 5 stars for me. I wanted to pass info. Also edited for grammar and wrong steps. Oops. Ciao!

It worked great until it fell out of my hands and completely broke apart. Now I need a replacement, but they are not selling it any more. I tried other brands, but they do not work.

I purchased this to clone my current secured parking lot opener (guest use) to avoid getting gouged for a replacement from the building management.The opener is on the list of compatible brands/units, but the clone feature does not work. Setup at the opener is still required, which defeats the purpose. The unit may work fine after setup, but it was wasted money for me.

I also mimicked my community gate remote and my garage door remote into one unit. Read the reviews because they're helpful. I don't want to reiterate what has already been said here. Additionally, if you have a Genie garage unit like me, I found that it works only after you train your actual garage door unit with it in addition to mimicking your original garage door opener (i.e., I couldn't get my garage to open just by copying the original signal). Follow the instructions in the Amazon video (there's a few, the 1:40 long one). Here are the steps:1) Copy your original garage door opener signal.2) Use your new remote: hold the two left side buttons down simultaneously so it goes into learn mode again (same light flashing as when you copied your original signal- different buttons)3) Hold the button you programmed that mimics your original garage door opener4) Put your garage door unit on learn mode so it can accept a new signal your sending5) Aim your new remote at it until it pairs with the mimicked signal.6) Test your new device and original devices

Did not work on my garage door opener!! But works on other remote controlled devices I have. Clones easy and works well..

This product is garbage and was a complete waste of my time. Followed directions provided and had to repeat probably 50 times to get the new remote to copy my old remote. Once I successfully copied the old code it wouldn't open the garage door. My opener is a model listed in the directions.

The instructions provided didn’t work. My Liftmaster 3585 has the purple learning button - press the purple learning button and then press the button you want to use on the remote.

Didn't work the clone mode with another remote.. i was trying the barrier gate remote replication for BFT system

جربته على ريموت كراج الموسى وشغال تمام

Did not work

ALL GOOD!!!