DisplayPort Switch 8K Splitter Bidirectional DP 1.4 Switcher 2 In 1 Out/1 in 2 out Supports 8K@30Hz 4K@120Hz Compatible with PC Host Monitor Laptop etc

Works flawlessly for me. Critically it does not seem to manipulate the signal at all, only redirects it which is great. The monitor appears to the OS & Display Driver exactly how they would if connected directly. DDC works exactly as normal also. I have only used this in the following configuration. | | <-- PC 1 Monitor <- |Splitter| | |<-- PC 2 Some behavioral notes: - When switching inputs, it appears to switch it electrically. Meaning a computer for example will react as if you just pulled the cable. This is perfect for my use case, but if you frequently switch between computers your windows may get rearranged as a display is connected and disconnected. - It does not remember your selected input if it looses power. - It requires a USB power supply. It does comes with a cable with the barrel connector, but no power supply.

2nd one of these I have bough for a computer desk I am building. I have 3 monitors and am using these to switch between a dock with my work laptop and my PC. Only tested one so far. Nice metal case and really good quality build. It does need a USB port for power, and if the power drops it will always start on DP1. I can't say i have been able to test the quality, I don't have a system at the moment able to do that. Absolutely unique to my situation, I am planning on rewiring these to integrate into the desk so all cables are hidden. It's very nice that they open easily with screws and the switch is the standard common surface mount push button to easy to extend that to my switch panel. The only issue will be the LEDs which are tiny surface mount ones, though they do have markings for a standard round LED so may not be so bad to replace/extend.

Works great for switching monitor outputs, however not quite good enough for a clean signal through VR so not quite what I needed

Trying to switch between a Surface Dock and a Surface Dock 2. Neither sources work with it. Or the output cable to the monitor does not work. Either way, just does not work for me.

Very happy with my purchase of this item, using it to split/switch between an extra monitor and my Vive Pro VR headset. Works perfectly for this and feels well-built and of good quality.

This product works when lowering both input refresh rates below 60Hz, but with flickering/glitching every now and again. If I want to run two 5120x2160 inputs to a monitor output, I am forced to either lower the refresh rate or the resolution on the inputs otherwise glitching and flickering happen. Lowering the monitor's DP protocol from 1.4 to 1.2 solved the issue but without higher resolutions/HDR being available of course. The cables are fine, tested elsewhere. The USB power is on a standalone high quality power input. Will be returning. This is not a high performance item. EDIT: After making the cable between the switch and the monitor shorter, it works without flickering. The cable limit seems to be around 1m before things start to fail at higher refresh rates/resolutions. This should be made clear in the advert.

Does what I needed works great. Even allows me to run g synch to my monitor for smoother motion

I had it set up with a PC and a laptop and was getting grey flashes on the PC side. Tried swapping cables but to no effect. Eventually fixed it when I tried a short cable from PC to switcher. Switcher to monitor does not seem to suffer from this issue though. Product otherwise easy to use and does what it says but beware issues with longer cables. One review mentions does not work with adapted inputs but I found it was fine with a USB_C to display port adaption.

I use this as a switch for my Wacom tablet between two computers. Works fine. Not sure why the review asks about a remote. It sits on my desk and I manually select it.

Très bien et utile pour deux cartes graphiques, deux pc à la fois

Habe einen WQHD Monitor auf 165 Hz angeschlossen. Der Monitor hatte so lange Aussetzer, bis ich diesen auf 24 Hz runtergeregelt hatte. Nimmt man Kabel zum Switch und vom Switch zum Monitor die zusammen nicht länger als 2 Meter sind, funktioniert es problemlos! 2 Meter zum Switch und dann nochmal 2 Meter zum Monitor wird nix - wofür der Switch aber nix kann ;-)

Tras buscar algún KVM que admitiera 2K 144Hz y G-Sync y desistir al darlo por imposible encontré este producto. Ya había probado algún switch similar pero de otra marca y no soportaba 144Hz ni G-Sync. Decidí darle una oportunidad a este y puedo decir que ha sido una gran decisión. Funciona perfecto. La única pega, como algunos ya han comentado es que cuando cambias de entrada con el botón, el PC detecta el monitor como si se acabase de conectar, posiblemente porque hace el envio directo del vídeo y no trata la señal. De ahí que funcione como se espera. 100% recomendable.

Worked well for just over a month (so I wasn’t able to return it) and then started flickering every 30 seconds or so, becoming unusable. Unfortunately not the permanent solution I was looking for. EDIT: Seller Reached out to rectify and I received another switch that is working well. I greatly appreciate them taking the time to contact me without me needing to do so. that's 5 star service. (as long as this one stays working, haha)