Tribesigns Height Adjustable C Table with Wheels, Mobile Couch Snack Side Table with Tiltable Drawing Board, Sofa Bedside Laptop Stand C Shaped TV Tray with Storage Shelves (Black+Oak)

This table is very well designed and excellent for it purpose. It worked so well for my wife that we bought a second one for me. They were both well packed and complete. The mechanism on the second one appeared broken at first glance but closer inspection found that a shift of parts during transport had apparently shifted it - with a slight bit of pressure it snapped back in place and works as it should. Assembly was not difficult although time consuming and the instructions are clear. Each piece of hardware is clearly labeled and relate easily to the pictured steps in the assembly instructions diagram. One piece of advice based on "lessons learned," in assembly step number 6 only tighten the "D: screws finger tight during this step. That will help at step number "8." During assembly of our first one this was the only place of difficulty - step 8 - aligning the 4 legs for the top section with the bottom 4. Also, they seemed to slide very hard so when assembling the second one I tried spraying a light coat of WD40 on them. I don't recommend this as it was only marginally helpful and made clean-up more difficult. Having left the tightening of the "D" screws until the end actually was enough to make the whole process easier. Comments on the table itself: first, when fully assemble and at its lowest setting on all four supports the weight of the cantilevered end slopes down slightly. This is easily corrected by raising the front supports slightly and tightening the knurl knobs. It is then level and remains in place very well with no slipping. The second, and only other comment relates to the height adjustment. Because of the 4 tight fitting supports and the 8 knobs that actually lock each support in place setting a chosen height and holding it may not be a one person job (I expect I will find out for sure when I have to make the adjustments) and I would probably avoid this if height adjustment is expected to be a frequent occurrence. Even with those notes I would buy it again and recommend it to anyone that understands this. ADDED NOTE 6/10/22: On one of the two tables we have noted that every time the table is moved one of the wheels "locks." This is disconcerting and very annoying. On closer examination I found the either the caster is set too high into the leg or, the locking mechanism latch on the faulting cast rises too high. The result is that as the caster turns with table movement the latch hits the bottom of the lower shelf thereby "automatically" locking the caster.

First, quality was fantastic, easy to put together and beautiful. I would say make sure you measure your height under your couch as I didn't and it does not slide under and will have to lift my couch so it fits but that is my fault for not measuring. I will be purchasing another one to use with my bed. Great product!!!!

I bought this for a strange reason. I needed this to use for my heavy equipment simulator controls from logitech. Due to limitations in their thinking, they only include the ability to hook up to a desk or table setting, no connections to put it on a stand. Issue is, I use a large screen tv for my computer/tv/streaming/console game playing and not a desk or table in sight. After looking around at stands, I decided they had their own flaws as they were not really movable. As I have a non-adjustable C-table for my bed for laptop use, I took a look at it and surprisingly enough it would be able to take the clamps. But, the one I had was too high, had nothing to put the foot pedals on as there was no board on the bottom, and too short for all 3 pieces. So I browsed around and took a chance on this. And it worked once I made an adapter to hold the pedals in place and it also allowed me to run the wires out of the way to protect them with wiring clips as they're typical manufacturer junk of being easily destroyed. For sturdiness, it's pretty good. After a couple uses though I pulled off the original wheels and put heavier duty ones on with better locks. But as it's not being used as intended, can't hold the manufacturer responsible for that. But the wheels did lock and hold decently and didn't look like an issue for normal use. I also took off the laptop/book rest so the steering wheel would fit better. Ease of assembly? Easier then some items I've had the displeasure of dealing with. The C-table I already had was confusing on instructions and awkward to put together by myself. This table, had no actual issues other then the locks the wheels screwed into weren't set correctly. A small flat head screw driver allowed me to "pull" them into place so the screw wouldn't bind on the frame metal. All and all, I put it together in about 15-20 minutes by myself even dealing with 2 curious cats and a dog wanting to help. On instructions, they're basically idiot proof. And as someone who's been an idiot too many times and having to disassemble and reassemble items due to "misunderstandings," I appreciated the clear part notations and assembly. Now that I think about it, another issue was that the bolts don't sit flush (not a major concern for me) and that screwing into the frame parts could be difficult to get started due to the roughness of the frame connection. But, a little patience and stubbornness took care of that. So being pretty honest on my review. For ease of assembly, I took off 2 stars mainly due to the "screwing the frame together" issue with all the roughness not allowing the bolt to thread into the assembly easily. For the price, it's hard to say if the quality of the frame pieces should be better, but for the annoyance of having 6 of the 8 frame assemblies taking up most of the assembly time trying to get the bolt in basically accounts for the missing 2 stars. I've had better, I've had worse. Sturdiness, haven't had an issue except for needing to change out for wheels with better and sturdier locks- but as pointed out, it's being used for something that the manufacturer didn't intend. Value- I basically took one star off due to receiving an email asking for a revue before I had this for awhile. Not every problem shows up quickly and you can't judge value all the time within a couple days (as another recent purchase for a different item was good for a month and then decided to literally blow up scaring the animals and waking me up.) Give me time to decide if it's a good value... So far, based on what I know for now, it's 4 stars that can go up to 5 over time. But only time will tell. Picture is from the day I assembled it and before I ran the wires out of sight and a few days before I changed the wheels out. But, it's given me the ability to roll it out from the side of the couch, play my games, then roll it back when I get done.

This is an excellent product. Almost all of it is metal or wood, with minimal plastic parts. The table top is comodius, as seen in the attached pictures. It is also very stable, given the "load" I have added to it to support my paint studio. Only thing unacceptable is the little plastic bar at the bottom of the table top. It is not wide enough to full support the configurations I show in the photos, so I will probably work up and alternative in my workshop. Castors are cheap plastic, but the rest of this is SOLID!!!

I chose this table for the flexibility and extended base that can be used for a foot rest. It was easy to assemble by myself. I love that the titling ability of the surface.

Overall this table is good but they could easily make it great with just a few adjustments. It looks just like the picture and was easy to assemble. They had great instructions. What I don't like: 1. The piece that lifts up is awkward. If you accidentally lift it even a little then you have to lift it all the way up to get it to release to come back down. I'm sure they could come up with a better system for this 2. I don't like how you have to adjust the height. It is very difficult and there is no way to fully lock it in. they should borrow from the hospital tables and use a lever system or even the system where there are buttons you push in and then move to another whole. 3. The wheels work great even on carpet but they are so close to the bottom tray that sometimes they get locked inadvertently when moving them. Seems like another easy fix for the company. It's a pretty decent table for the price and does the job, I just think they could make it so much better.

This table is what I was looking for. Bought it because I recently love painting but wanted to sit on the couch. Really enjoy the adjustable hight and tilt table while still having 1 flat part. Love having the extra shelf for my other hobbies. The only thing I wish was better was the wheels.