12V LED Transformer 24W 2A

Works perfectly and easy to install

As long as you have some wire strippers and a small screwdriver to hand then these are a doddle to wire up. If you're wiring from a ring main with 2.5mm cables then you'll need a Wago box and some 1.00mm twin as the diameter on the terminals is pretty narrow.

Used to convert a halogen shower downlight to led as the existing driver didn't work with led. All good. Saved the expense and waste of buying a new extractor fan/light.

The screw fixings for the cable clamps seem inadequate for the torque required to tighten the screws and clamp the cable.

The terminal screws are too small and will definitely fail. I would suggest failure after 3 to 4 times applying torque to the screws. Did the unit work, Yes. Remember that if you cannot rely on the terminal screws, failure is guaranteed. Why would anyone reduce the quality on this fundamental issue..... shave a little on manufacturing costs ?. I will be buying something else to replace this item. It's not a good price if this is a built in "Point of Failure"

Fitted this with 5 x 4.5w led spot lights. However the unit flashes when being turned on, this is very annoying and so had to refund remove one light fun the circuit to fix.

Installed one straight away and worked well, just came to use another and it doesn’t work, it only gives 3v output. The third one I bought worked fine. Budget for a 33% loss. Only a one month return period.