🌙 Light up your nights, effortlessly and smartly!
This 2-pack 12V 10A photocell light switch automatically controls outdoor lighting by turning lights on at dusk and off at dawn. Featuring a waterproof design and built-in time delay to prevent false triggers, it’s easy to install on various surfaces and ideal for driveways, gardens, street lights, and more—ensuring energy savings and enhanced security with zero manual effort.
M**T
Works
Worked with 12v dc solar setup. Connected lights
J**Y
Works Perfect
Simple installation. Works like charm
A**O
Works as Advertised
Easy to install per instructions. Black to Load Terminal of Transformer, Red to the Load (lights) and White to both the Transformer Common and Load (lights) Common. One note, the photocell is rated at 10 Amps. So if your Transformer Output is 12 Volts your maximum Load is 120 Watts. P=I V Where P=Power, I=Amps and V=Volts.
J**E
Good solid design Needs heavier gauge lead wires.
Works very well. Correctly rejects things like car headlights and sudden changes In light. The only negative is that the lead wires are too thin. Given it is rated at 10Amps, the wires are too flimsy. Seems to work OK though.
M**N
Price
Works as it should easy to wire up
J**S
Good little unit
I've read a number of reviews on here saying it doesn't work with DC. It absolutely does. You just have to connect to the correct wires. Positive goes to the black wire, and negative goes to the white wire. Red is the output.I'm using this to operate some yard lights off of a solar panel battery system and it works great!Would highly recommend these for any 12v project where dusk to dawn operation is desired.My Solar Battery puts out about 12.6 to 12.8 volts at night, 13.8 volts during sunlight hours and have had no issues, so I'll say there is some voltage tolerance in the units.
M**S
***WIRES TOO THIN. Item works but not for stated amperage***
Item works, but the wires are only 18 or 20 AWG. Thus, the wire gauge (thickness) is only good for currents of about 1-5 amps based on US wire recommendations. I was planning to use this for solar powered landscape lighting using 12 AWG wires. Connecting this sensor's 18 or 20 AWG wires would be a very weak link in the setup.
J**M
Use them for houlg lights
Best dusk dawn i have found works perfect for my set up
Trustpilot
Hace 1 día
Hace 3 semanas
