PXT MFT Fixed Stock Kit - Stock Lock (Mission First Tactical)

This is a quick, cheap, easy way to pin your MFT Minimalist stock.I’d suggest using a T8X2.1/2” torque screw driver to remove the hex screw inside the stock, because a 1/16 hex key is too weak and you’ll damage the hex key and the stock if you try to back it off.I’ll also suggest you’ll need a punch tool to drive the aluminum nut into where the plunger used to go. It’s a super tight fit, so also use a bit of lube to assist.After that, just screw it all in with the supplied hex bolt with the three washers together and you’re golden.It was fast, and easy.

Got these today. Little disappointed that it didn't come with the long set screw shown in the video to use with the vise. I used an Allen key and the small screw provided. Set up works as intended. Total time for install is about 3 minutes

Absolute trash. Followed the video they had on their website and it doesnt fit an MFT minimalist stock like it says it's designed for. Buy the stock lok or something else. Dont waste your time with this product.