elago Mount Compatible with Google Nest Hello Video Doorbell (2021 Battery Model) - Doorbell Chimes, Perfect Color Match with Angle Wedge [Ash], WiFi Free - NOT Compatible with Wired Model

It is a very to navigate and set up with the Google Home app and you are able to change settings for literally every including announcements trough all your Google devices at the home if someone rings the bell. It was very simple to install with the instructions it had in the box.

This product basically completed the look of my front door wall. Before installing this, the wires are even visible from the side, alongside with the edge of the hole, and now they are all hidden behind this mount!!The color perfectly matches the doorbell as well. Very satisfied.

Helped cover the huge hole that was left from the original doorbell. The color match is not perfect but it's very close! Install was very easy. Part of the hole is visible when using the angle mount not very noticeable.

It gives the WOW factor to the Nest doorbell and it covers the imperfections of the wall. I have received more compliments on the wall plate than the doorbell. It was a great purchase.

I got the nest doorbell last year, and its been great, except for one small detail. My home was somewhat sloppily built in a few areas, and the doorbell area stucco is one of those issues. Because of this, when I removed the builder grade doorbell, and installed the Nest, you could see a lot of this mess. I had considered getting some stucco patch, and fixing the stucco. Fortunately I came across this plate, and it worked perfectly in fixing my issue. One caveat, when I removed my nest doorbell, the locking pin got stuck. I googled all over how to fix this issue, because the doorbell could not be reinstalled with the pin stuck. Most reviews said reach out to google and they will replace it. i have reached out a few times, and google did not respond. So I am probably stuck with a flawed doorbell. That said, I did take some painters caulk and pout a spot of that where the locking pin should go. I slid everything in place and the caulk held it. Now the caulk has cured, and I have a good fit. When it comes time to remove it, I may have some issues. But my doorbell is wired, so hopefully this wont happen anytime soon. I am disappointed in google for ignoring me. But that's what you get when you deal with some companies, Not everyone can have Amazons customer service. Again, none of this is anything to do with this mounting plate, which worked flawless. but you may experience something similar when you remove your nest doorbell, and this is a solution that worked for me. The reason it works is that there are sliding latches that hold the doorbell on to the OEM mounting bracket, the pin only locks it in place. The caulk just replaces the pin, not the sliding latches.

I tried replacing a standard round doorbell plate with a Nest Hello doorbell, but it left a gaping hole in the wall, potentially exposing wiring, etc. to the elements. This plate covered the hole and made the installation look professional on every level.

I bought this thinking it would be a nice elegant way to cover the prior doorbell hole that the Nest Battery Doorbell with it's angle mount didn't quite cover. It checked all the boxes - especially being color matched. A comment in the Q&A that works with the angle mount (which is technically true I suppose).It was a FAIL.The plastic and color are spot on. Quality is nice. If you don't need to use the angle mount, it would be downright awesome.Where this fails - is despite elago's comments that it works with the angle mount fine - it leaves a gaping hole when used with the angle mount when looking at it from the side. Way too much space for insects to make a home in.The center hole is wider than long aggravating the issue. I so wish the center hole was narrower and oriented the other way (longer vertically than horizontally) or had just a small round hole to pass the wires through so it worked perfectly with the Nest Angle mount. I see no reason it needs to be as big as a designer apparently settled on here.Alternatively a color matched piece that filled the hole and could be drilled as appropriate would solve the challenge for those stuck with needing the angle mount and wanting this. Still left with a challenge on my doorbell to solve, and I really don't want to do it with caulk or route a piece of wood/plastic and trying to match the color...

Not as sturdy as I expected.

Pros:-Facil inslacion-No requieres mas perforaciones

Un producto muy caro para lo que es

Wall plate makes your doorbell looks even better. Recommended to purchase.

Total disappointment. Bought 3x but each time all the package is opened, only left the plastic wall plate but all the necessary *important* accessories all went missing, so how to mount the plastic wall plate to the wall ????

Tengo internet de 30mb y tarda mucho en mostrar el video de la entrada. Hay buena señal afuera porque tengo repetidores. El equipo de Google es bastante lento, no lo recomiendo para utilizar.