ECOTRIC Universal Motorcycle Cruiser Front Outer Fairing Batwing w/Clear Windshield 37" Wide x 24" Tall Bat Wing Transparent Black ABS Plastic Durable

I purchased this for my 2013 Honda VT1300CSA Sabre. I originally bought it as an experiment to see if I would even like a fairing on my bike, and I've come to REALLY like it. It is made of plastic, but the finish is great. I think I'll eventually paint it as I feel the plastic may show scratches at some point and I don't believe I'll be able to do anything about it. That's not a specific fault of the fairing though. Anything plastic that will see road time would do the same. The upper handlebar mounts didn't work for me, but that's only because my bars are a larger diameter than most bars. I was able to find some roll cage/bar mounts (that would normally be used for mounting off road lights to a roll bar) that worked perfectly and allowed the rest of the upper fairing mount to work. The lower mounts happened to fit perfectly on my headlight mounting bolts. I adjusted it up & down, forward & backward, tilted up & tilted down several times before I got it to where it does a great job with wind coverage. I did have some issue with helmet buffeting, but after really digging into the cause of that, I bought some wind deflectors and installed them on the front forks, and that fixed the issue 100%. It was simply wind coming from underneath the fairing and over the tank, and was not the fault of the fairing at all. I now have the fairing mounted a few inches further back than what the pictures show, but this should give you a good idea on what it looks like and how I used the bar mounts. I am 6' tall and the top of the windshield is about 2" below my chin. I think that if the windshield was about 2" taller, it would provide just a bit more wind coverage, it would still be below my line of sight, and it would be perfect. I did end up having a problem with the hardware for one of the upper mounts, but after contacting the company, they took care of me and the issue immediately. Couldn't be any happier or more appreciative of their attention and help! I think this fairing is a fantastic option for a universal fairing at a great price. I've got ZERO regrets on my purchase and would recommend it to anyone.

This fairing looks nice and does what it is supposed to do. A couple of observations since riding with it for a week or so: 1. It was a bit tricky putting it on, not difficult, just a lot of adjusting to get it right. 2. I’m 6’ and the top of the windshield is in line with my vision which is a bit distracting. I might try to find a taller windshield to put on if the manufacturer has one. 3. I replaced a regular windshield with this and find I have more wind hitting me lower on my body, which isn’t bad for summer, but will make riding in cooler weather a bit of a challenge. On the plus side, my wife doesn’t get as much of the wind over the top, so that is nice. 4. It hasn’t changed the handling of the bike at all, which is nice. Overall I like this fairing. It seems to be sturdy and well made, and It looks nice on my Suzuki Intruder.

Looks good on my 2025 Harley Nightster. Installed it in about 30 mins. Top mounts mounted right up. Bottom mounts I mounted to the turn signals. Great product for a great price.

This is a good quality Fairing and looks and functions like ones twice the price. It does come with the handlebar mounts and some L brackets for the lower mounts but this is where each installer will need to get creative as there are not too many places to attach the lower strut supports. I had relocated my front turn signals so I was able to use the old signal mounting holes with the provided L brackets and it worked like a charm. It looks great and is very sturdy. Oh and just an FYI, the rubber grommets are punched so to be used in installing the windshield. No instructions are provided so expect to do some trial mock ups before doing the final installation.

Product came packaged in a sturdy box, no instructions but it's pretty self-explanatory. I have it mounted to a Suzuki Boulevard C50 and the installation was pretty painless. I ended up running the bottom set of mounting posts back up to the handlebars with the existing hardware I had for my old windscreen I think it's a lot nicer than mounting near the headlight. I have a good amount of room on the front where I can install some Cubbies or pockets for storage and I plan on running a flat panel in between the two bars to mount the tablet for maps. It's a nice glossy black it matches my bike really well and it's very sturdy up to 95 mph no problem. Doesn't quite cover my hands the way I want it to but I guess I can try adjusting it a little lower or raising my handlebars up a bit, that's what you get when you buy a universal windscreen. The only major issue I have is the clear windscreen itself, there's a very large noticeable warp or Distortion towards the top of it that is directly in my normal field of view so whatever I'm looking at is either slightly squished or slightly taller as if it has a funhouse mirror type of effect. It's very distracting and if I were to position my eyes above the screen obviously I'd have no issue or if I were to look directly through the center of it it would be okay, but I can't imagine it's supposed to be like this. I reached out to the seller maybe I got a defective molded windscreen. If I can't get a replacement from them I'll see if I can find something else that will fit. UPDATE: the seller sent a replacement unit, and while this was not warped like the first one, it came in slightly scratched. Oh well, I can live with that at least. Keeping at 4 stars for the sellers quick response, would have made it 5 if the replacement came in good condition

Liked product very much went on easy had to use some mounts from my other fairing but is a vary nice fairing the price was fantastic. works just the way it should. vary happy with the fairing.

I generally don’t like the fairing look, but living near Lake Erie with the wind the area gets I decided to try one. Found this one for only 160 and figured I’d try it before breaking the bank on one, and I’m pleased so far with it! Came with everything to mount, just had to get creative with the bottom. I have an 05 Honda VTX 1300 and used the headlight mounting bolts for the bottom mounts. The brackets bent to where I needed as I tightened the nuts. Looks really nice, has held up so far, will update this review if anything changes. Overall pretty happy with it, especially for the price!

Do not buy this if you own a Honda Fury. The brackets are made for a much skinnier bar. Even though amazon says yes it fits, it does not. It looks nice sitting on the bike and for the money it would be worth it if it actually fit but unfortunately I will have to return it.