🚵♀️ Mud? What Mud? Ride in Style!
The FIFTY-FIFTY Mountain Bike Fender is a lightweight and durable mudguard designed for front and rear compatibility with various wheel sizes. Made from high-quality polypropylene, it offers effective protection against mud and debris, ensuring a cleaner ride. Easy to install with included zip ties, this fender not only enhances your bike's functionality but also elevates its style.
Brand | FIFTY-FIFTY |
Color | Yellow |
Exterior Finish | Yellow |
Material | Polypropylene |
Item Dimensions LxWxH | 8.8 x 10.8 x 0.1 inches |
Item Weight | 1 Ounces |
Style | Modern |
Auto Part Position | Front |
Vehicle Service Type | Mountain Bicycle |
Fit Type | Universal Fit |
Item Package Dimensions L x W x H | 10.59 x 9.25 x 1.97 inches |
Package Weight | 0.05 Kilograms |
Brand Name | FIFTY-FIFTY |
Manufacturer | FIFTY-FIFTY |
Part Number | FFmini2017071304 |
Outer Material | polypropylene |
Size | 1 Pack |
Sport Type | Cycling |
R**S
Hard to Review. Looks and Works Perfectly
Kind of hard to give an in depth review of something like this, other than to say it came with everything needed to install it. It was easy to install and functions as it’s supposed to. I do like the design and color as it matched other components on the bike (a 2007 Trek Fuel) so I’m happy.
M**L
Sleek & Efficient
This item came in on time, and the quality is perfect. The holes are symmetrical, and they lineup on the bike just fine.The front fender, and the rear fender are the exact same part, which makes it harder to screw up if you’re like me, moving 100 miles an hour. I just finished a ride through single track embedded with moderate features. Defenders stayed on without issue even with the hard landings, G-outs and shralps.If you’re looking for any efficient part for a reasonable price, look no further.
W**R
FIFTY-FIFTY mudguard on a Salsa Fargo
I installed the Fifty-Fifty mountain bike fender/mud guard on my 2018 Salsa Fargo 27.5. Installation is a piece of cake. Four zip ties hold the mud guard in place. As you can see from the photos very little of the fender protrudes out the front, with most of the coverage in the rear. There are multiple holes in the mud guard to facilitate installation. You can experiment with which pairs of holes you use and vary the placement (fore and aft) of the mud guard. This Fifty-Fifty mud guard is available in black with several different accent colors. I went for the black/gray version. The graphics are relatively subdued and as you can see it looks pretty good on this bike. You can also see from the photos that there is plenty of clearance between the Schwalbe G-One Allround 27.5 tire and the fender. This mud guard reportedly fits 26’, 27.5” and 29” tires - both plus size and fat bike tires. Regarding coverage for fat bike tires…..that would obviously be dependent upon the width of the tire. I would like to try installing one of these on my Salsa Beargrease fat bike with 3.8 wide tires. Quick shipping from the vendor. Item arrived unscathed in a large padded envelope. Directions were ok; it certainly helped to see photos of other installations but basically it is a no-brainer. Comes with plenty of zip ties.
J**E
Good, cheap mountain bike mud guard
Super easy to install on a front suspension fork with the included zip ties. Also, the material is flexible enough that it's not damaged if you rest the bike on this fender while transporting in a car. It doesn't block a ton of mud/grime, but it does stop anything from being flung up toward the rider's head -- and also protects the downtube and headset a little bit.
T**W
Good product. Know the following before you begin installation...
Nice product and can work just as well as much more expensive one. Note the following before starting to install.1) Instructions really are not that good. Watch some online videos for better installation info for similiar products.2) It comes with six zipties. Unless you work slowly and are very careful, plan on buying some additional zipties before beginning. That way you'll be ready if you make a mistake.3) As soon as you receive the guard, curve it into the shape you expect needs to be to fit your bike and then tape it in that position with non-marking painter's tape. Allow it to sit for three days and it will become easier to hold in place on the bike when you begin.4) Have a pair of pliers handy as well as a pair of wire snips.5) When first threading the zips through the guard, be sure both ends are on the outside of the guard (away from the tire), otherwise, the tire may scrape on them.6) When tightening, only pull each about 50% tight until you get all of them on. Then pull each as tight as possible and use the wire snips to trim.
X**
Great front fendor, ok for rear
Great option for the front end. On the rear tire it mainly keeps mud off of your dropper post, which is nice but if you're looking for something to keep yourself dry i'd get something else
J**N
Not big enough to help much
Doesn’t stop splatter up the back
B**R
Looks decent, doesn't rattle, has held up fine.
Lots of scree where I ride, this does a great job of keeping it out of my face. The provided zip ties are a little brittle, so I used other ones. I ride my bike a lot and it's held up great, looks decent too, and most importantly, doesn't chatter or rattle, even when you're blasting downhill.
M**A
Perfecto
Robusto y flexible. Se ajusta perfecto, se ve muy bien y funciona
Ä**I
Wurde genau so geliefert wie beschrieben und erfüllt seinen Zweck 100%
5 von 5*****
Trustpilot
Hace 1 día
Hace 2 meses