VITALCO TRS Male to 2 x 6.3mm Mono TS Female Jack Male to 2 x 6.3mm Mono TS Female Splitter Adapter Cable Y Cable

I'm using an audio interface that outputs the audio of my computer. I had, for a while, to unplug and plug either my sound bar or my headphones depending on the need.But with this, I can simply turn on/off the soundbar if needed while keeping the headphones plugged in all the time.The quality of the audio or its intensity is unchanged which is great.

Does what is says on the can. Converts a stereo 1/4inch jack socket into two mono sockets, one for each channel. Seems well made: Metal plug and sockets with moulded plastic tails , so pretty sturdy. So far no problems.

Does the job , very solid

Bought these for my monitors and just perfect. Quality is good and not had a single issue. Very nice leads

Good quality 😃

I use this cable to connect a footpedal to my audio interface so I can switch amp settings when recording. Its a good quality cable that seems like it will last.

The jack plugs and phono are made to a very high standard and are of real quality and look a lot more expensive than they were, and have thicker wire’s than the plastic plug type for better sound.

This one splits a STEREO male to 2 MONO females.If you are looking for the STEREO male to 2 STEREO females search"TISINO 6.35mm (1/4 inch) Jack Splitter Cable, 6.35mm TRS Stereo Male to Dual 6.35mm TRS Stereo Female Jack Quarter Inch Splitter Cord - 8 inches /20cm", or a similar one, which, although it looks way less fancier and cheaply made, it does the job.

I'm using this adapter to connect my Roland Aerophone Pro, which has a 1/4" stereo output jack, to a stereo that has dual RCA input jacks. It works well for this application and would likely work for other similar applications as well. Its plugs have metal covers that unscrew, but that could be a benefit or drawback depending on your opinion.First of all, be aware of whether your device has a mono or stereo output – some devices (most electric guitars, for example) have a mono output jack. Consult the manual for the device. In my case it's a stereo output, and I'm using a stereo patch cable with 1/4" plugs on both ends (separate from this adapter). Stereo 1/4" plugs have two black rings, while mono plugs have just one black ring. If your device has a mono output, or if you use a mono cable, you'll find that you get sound on only one channel (left or right) if you attempt to use this adapter. This adapter works only with stereo input.You should also be careful with output and input levels. Line-level signals are what I'm working with here, so I don't know how this adapter performs with other level ranges. Find out what your output and input levels are, and be careful not to give a too-high level to something that's expecting a lower level, or you might damage your equipment, and it won't be this adapter's fault.The left and right RCA plugs are clearly labeled (red = right as usual); be sure to plug them into the proper input jacks, or you'll invert your right and left channels.All three plugs on this adapter have metal covers that unscrew. You probably don't want them coming off unexpectedly, so make sure they're screwed on tightly when using this adapter. A lot of equipment has plastic ends that don't detach, but that means that if a connection goes bad inside it, you have to throw the adapter away and buy another one. These removable covers at least give you the possibility to repair a bad connection with a soldering iron, or at least to discover what the problem is. That's why I consider them a benefit, but you might not like them. You could always use some wax or glue if you don't want them coming unexpectedly detached.I suppose it's possible to use this adapter in the opposite direction – some device might use RCA jacks as outputs, and you might want to use a patch cable to connect that device to something else – but again, watch your output/input levels, because if those outputs are speaker-level, you don't want to plug that into something that expects a line-level input. Don't blow out an amp or mixer board. If anybody were to make an expensive mistake like that, it wouldn't be this adapter's fault.This adapter does what I need it to do, it worked out of the box, and it's reliable.

Cet accessoire est très utile dans ses configurations de sonorisateur. Celui-ci est bien conçu et la qualité est au rendez-vous. Je recommande vivement.

Top Produkt! Mehr kann man hier nicht sagen.Quali gut, sehr solide, keine Störgeräusche.

Ben fatto e a prezzo conveniente

Sehr wertiger Artikel. Da gibt es wesentlich schlechteres Material auf dem Markt.. Chapeau!!