Madaboutink Clear Waterslide Decal Transfer Paper for Laser Printers & Copiers 5x A4 Sheets

I used this for making some bespoke RAF decals and they worked really well.The laser versions didn't require sealing as they stay fast when immersed in water.I did however seal them with acrylic afterwards as the colour can flake off when handled.The transfer material itself is strong and a little bit like cling film to handle so it doesn't break up when being moved about.It was all very stress free and more satisfactory than anticipated.

I'm really pleased with this, it works great and opens up so many possibilities for custom model making. I used an acrylic lacquer from halfords, let it dry for 30mins and have had no issues with bleeding.

Harder to get hold of these days but did an excellent job didn’t work with inkjet printer had to use powder one at work

Absolute garbage. They run through printer ok but after that they are useless. Firstly you have to soak them for ages as the transfers don’t release from the paper. Cold water, warm water makes no difference. When they finally realise the transfer is micro thin so they just wrinkle up at the slightest movement. Don’t waste your money as they will just frustrate hell out of you.

Useless to me as the ink just looked on the surface DEFINITELY NOT INKJET COMPATIBLEONLY FOR LASERTHIS SHOULD BE STATED MORE CLEARLY - A WASTE OF MONEY AND TIME

Good quality item. Slightly confused as I wanted decal paper suitable for inkjet printing and the packaging states laserjet, but it does work, leave your printed item for a while before applying a sealant product.

First time making my own transfers. Great success! Printed using my old Brother DCP-9010CN colour laser: manual sheet feed set to thick paper, worked wonderfully. All 5 sheets printed, no failures.

My laser printer didn't like it at all , not the fault of the product , cheap printer !!!

Per ora ne ho utilizzato un solo foglio, per stampare il QRcode EASA per i miei aeromodelli, ma ha funzionato al primo colpo!Applicato senza nessuna protezione, vediamo quanto resiterà.

cumplió mis espectativas

This is one of the first items listed when searching inkjet waterslide decal despite being explicitly made for laserjet. This is not the vendor's mistake but be aware anyway!In general I'm not satisfied. Printing works fine with a laserjet and the printed motifs are not easily smeared during handling. However, no matter how short or long you soak it in water, the decal won't come off the paper as it's supposed to. You can pull it off carefully underwater, place it back on the paper and work from there but it really is a hassle. When placed it also is very hard to work with, wrinkling at the slightest touch and folding over itself at the edges. Maybe it was an old package of decals I got which has been sitting around forever or stored wrong. The quality I received is not acceptable though.

deludente. sulla mia samsung non c'è stato modo di fargli prendere la carta. si infila per 5 centimetri e poi va in blocco. usando carta normale o anche i fogli adesivi trasparente, invece, nessun problema.

Todo ok.