ubrokeifixit for Google Pixel 7 6.3" Rear Back Camera Glass Lens Cover Replacement for Google Pixel 7 6.3" 2022 GVU6C GQML3,with Pre-Cut Tape (2 pcs/Pixel 7 6.3"/Black)

Perfect fit for my Pixel 7.

This worked out pretty well to replace the broken camera glass that is pretty common on the Pixel 7 phones. There are a few YouTube videos that show the process but it sums up as taking out the broken glass protector shard by shard. Make sure to have a pretty wide clean area to work with that is well lit. Some glass shards may shoot out when gripping them with the tweezers. I worked on an opened out cardboard box so when I was done I just threw it all the way. It was helpful to heat up the area with a small hot air gun as doing so let the adhesive unstick without leaving much residue. Make sure that when you fully remove all the glass to turn the phone over and shake it just to make sure that no shards went inside the lens. Also, it would be helpful to turn on the phone and make sure that the camera fully works before putting on the glass protector. Before putting on the protector, make sure to hold it up to the light and wipe away and he smudges it has. Mine had a small fingerprint smudge apparently from factory so definitely make sure to check. After putting it on I quickly hit it with some hot air just to make sure the adhesive was nice and warm. I don't want to say this will be waterproof but the adhesive did seem to go all the way around the edge so hopefully some water resistance is retained.

Great kit, came with everything needed. Took about 20 min to do, most of the time spent carefully removing glass so it doesn't fly everywhere. YouTube for instructions. I didn't bother with heat gun, since most videos advise against it. Didn't struggle with lifting it. Replacement glass looks clear.

There are no instructions with this kit. I recommend that you watch 2-3 different how-to YouTube videos before starting. The fine tip tweezers were a little too fine and I bent one tip trying to get the old glass out, but otherwise they were good. The plastic point scraper was perfect for the job and I used that a lot. Glass fit perfectly and was clear when I checked the camera.

Great kit. Fit perfectly. Watch a few videos and definitely use a heat gun on low about 6 inches away. Makes removal a breeze.

Perfect kit! Took me just a few minutes and my lens cover was replaced. Saved me from having to get a new phone.

Like most others have said. The hard part is making sure you remove the broken glass and adhesive completely prior to installing the new glass. Installing the glass itself is a snap! I like that it came with two replacement glass pieces, just in case you make a mistake or as a spare in case you need it in the future. The glass does not seem to be as clear as the original when viewed from the camera, but the camera seems to compensate for a crisp a and clear picture.

The tweezers in particular are good quality and were very useful. Other packs come with a metal knife/poker piece, so I was concerned the plastic one in this kit would be inferior, but I actually liked the plastic poker/knife piece since it was effective yet didn't scratch my phone surface. Both the tweezers and the poker/knife piece were essential to the replacement effort since the old lens cover would only come off in tiny pieces, bit by bit. I had to aggressively scrub the old adhesive off with the knife/poker piece. I don't know what the guitar pick was for, but in hindsight, maybe it would have been useful for handling and placing the new lens cover instead of using my fat oily fingers.

Vienen varias herramientas para apoyarte en la aplicación del protector, todo muy limpio, es facil de aplicar y hasta ahora ha durado bien.

Removing the broken glass was the hard part. Installing this was a breeze! FYI. Pretty sure this isn't waterproof. There may be some better quality replacement glass that can retain that waterproofing.

Super easy to remove the remainder of the broken glass cover. The tools that are provided do a great job and definitely help. The provided wipes is probably good enough to ensure the lens, flash and other sensors are clean but I had a can of compressed air so gave that a squirt to be sure. Application of the replacement glass was simple, the supplied tweezers definitely helped. The kits came with two replacements which many reviewers said you will need as you'll break one. Not so but now I have a spare in case of another breakage.

Easy install fits Just like the original

Son muy frágiles y solo venía un cristal no dos