CURT 56070 7-Foot Vehicle-Side Truck Bed 7-Pin Trailer Wiring Harness Extension, Select Chevrolet, Dodge, Ford, GMC, Nissan, Ram, Toyota

Easy plug and play hook up on old harness making both plugs function without cutting and splicin ! Quick install as well as easy ! Works as it should. Length is perfect to run down to old plug adapt off it and run into bed for a gooseneck hook up where I wanted it .

Very easy to install and seems well built! All the light and blinkers worked so it does what it’s supposed too! Seems like a solid product, would for sure recommend!

This took me about 30 min to install. Plugs matched up just fine. Install did go easy once lowering the spare tire.

I had a flat bed put on my truck and I wanted to put a plug in with my ball and this made it super easy to do. The plugs fit right up to the plug coming off my truck and was able to plug right up to the plug on the back of the bed. And it’ll be super easy if I ever want to take this off and change it to a different truck. It works amazing ! A very thought out design!

Very easy to install and works perfectly. Ready to tow a 5th wheel!!

The wiring harness seems like a good product, but the installation kit needs improvement. It's a simple install and shouldn't take you long to complete.I installed the product last night. I watched some installation videos, which made the instructions easier to follow. You will need a drill and a 2 1/8" hole saw. One of the connectors didn't quite fit into the back of my factory 7-plug receptacle. It snapped together after using a razor blade to shave about 1 mm from the fastening clip. This may have been an issue with my factory plug, however. There was a rubber o-ring and quite a bit of dielectric grease in the old plug, which may have prevented the connectors from fully mating.The factory box was not taped closed and was missing the four self-tapping screws, so I had to make a run to the hardware store. The box was lightly damaged. My assumption is that the box was dropped at some point and the screws didn't make it back in the box. They weren't in the Amazon packaging, so they must have disappeared before shipping. Other reviews suggest the provided screws are too short for spray-in lined beds, so they may have been useless to me anyway. I also had trouble with the zip ties. It was 40 degrees Fahrenheit during installation, so the plastic zip ties were brittle. The little tab inside the zipper broke on all five ties that I tried. I ended up using Harbor Freight ties instead. I was surprised to find that they were better than the Curt-supplied ties. In my opinion, the factory zip-ties should be substantial enough to hold up to low and high temperatures. This is a product for pickup trucks, after all.Anyway, I'd recommend the product as long as you're willing to supplement the mounting hardware.

Why did you pick this product vs others?:Price and brand

Why did you pick this product vs others?:Installed into truck to haul our 5th wheel. All connections are working. Build quality:Connector door is sturdy and closes tightly, also grabs the 7 pin connector when its plugged in nicely.