RTL49-10 sheets of 8.5" x 11" - Translucent Backlit Film sheet/Back Lit Paper Displays, Excellently printable with all Inkjet printers & Laser Copiers

Need to up the ink saturation to get good color with backlighting. Easy to print on.

imprimí unas hojas de prueba a blanco y negro, para ver como se miraba, las dos series las conecte a la misma corriente de luz eléctrica, eso si NO se si es lo correcto, quien me puede asesorar, o conecto una por separado

Used Canon Pixma inkjet printer. The print dries quickly and colors are vivid. I use prints in a back lit shadow box. Highly recommended!

I tested a sample sheet by printing a color chart using standard settings for matte paper on a Canon Pixma Pro-10 pigment inkjet printer.The saturation of the colors when backlit is about as I expected for a single layer print. If you want the colors to be anywhere near what you might call vibrant you will need a high CRI backlight. I tested on both an LED light table (first photo, and probably not great CRI) and on a table backlit with a photography light set at a color temperature of 3900K to try to bring out more red (second photo above). The blues suffer with this lower color temperature however.The film prints well on the matte side with an inkjet printer and offers some light diffusion. But you will need to have a fairly uniform back light to start with because it will not hide hot spots like individual LEDs.I'm not sure whether a dye-based inkjet or laser printer might produce better results, but the film package doesn't have any instructions for printer types or settings. As a side note I have found from previous experience that you can sometimes get more vivid color saturation by precisely aligning and stacking two prints. This comes at the expense of brightness.I think the film is fine, but I would want to do more experimentation with different printers and setting in an effort to increase color depth and saturation,

Picked these up for some shadow box designs I've been working on from a DIY project, they did exactly what I hoped for.My work was black and white, so it looked great backlit just from the contrast. My wife had me do a colo print for an idea of her own and we found out you want to bump up the ink and saturation, if not light was bleeding through a little bit. On the second print we got the desired resultsInexpensive and creative fun!