PHILTOP 21-389 Power Steering Pump for C300 2008 2009 2010 C350 2008-2010 with Pulley, Power Assist Pump 54666501, Automotive Replacement Power Steering Pumps

Fit Mercedes m272 engine and works well.

Part worked great for my application and steering is easy and does not wine pump is quiet.

I bought the pump about a month ago and still working on the vehicle with other issues and the car hasn't been driven since I got the pump on. Turns out the pump is leaking and i have to pay to get it replaced again not to mention being charged an additional labor fee. Very Very Upset!! And i missed the 30 day mark so i can't return it!!!!!!

Don't make the mistake I did, does NOT interchange with the eagle 5.7 we have in our 09 Ram. Bolts are right, the shaft is wrong for the pulley needed.

EXACT match to the OEM pump on my 2001 dodge Dakota. This even comes with a new reservoir cap. Remanned units are equally as expensive and don’t come with a cap. This is a BRAND NEW UNIT so there’s zero chances of getting someone else’s junk.Highly recommended buy!!!!!

Not for 1996 Ford F150 XLT 4.9 IL 6. Amazon advertised as fitting, but not quite correct.Original was leaking from the high pressure (HP) return line. The pump was original so I decided to replace pump and line at the same time. This unit fit the mounting and pulley system fine, but was a miss on the hydraulic connection where the HP return line connects. This unit was about 1/8 inch too short on the female threads - so the HP return line would never seat fully. HP return line would tighten down as far as possible, but still have a 1/8 or 1/16 inch gap preventing a seal & leaking.I was able to remove the connector from my original pump. Combine that with the gaskets from this pump and you effectively have a rebuild kit. The combined unit fit well, connected and sealed perfectly. No leaks or whine. The pump runs great so far.

Works as expected. I installed it in a 2000 GMC Sierra SLE 2500 6.0l. Fit as expected and is working.

Good description fast delivery works well

Pump arrived at correct time frame, and works fine with no issues. Packaging was horrible and did not protect the pump well, box was taped well enough it didn't have holes. However looked like it had been kicked down the road from the supplier. Both return lines on the back were bent, I was able to bend them back to make it functional.