Breathable Moisture-Proof Bed Plate, Guest Tatami Mat,Wood Roll-Type Slatted Bed Japanese Floor Futon Mattress, Floor Sleep Bedding (Full)

The media could not be loaded. 9 Month Update: Still in perfect condition. Use it every night. No issues. No splinters.———-I was afraid to purchase this because of limited/mixed reviews. I was also concerned that it would be a bulky, heavy wood (it’s not).Product delivered in perfect condition. Mine did not have splinters.Free returns gave me peace of mind.Very easy to roll !!!I’m pretty good at building things and seeing some say “it’s just a wood pallet” I thought about doing a DIY.I’ll try to make this short: This is not “just a pallet.”This wood is actually quite expensive due to how lightweight and smooth it is. Additionally, to build something that rolls would be extremely tedious. Even if you instead made a normal platform bed, using similar wood would be very expensive. Alternatively, you can use “common board” which is cheaper, but it is very heavy and bulky.All that to say this is an excellent price. In fact, the price is almost (or less than) what it would cost you in just material / supplies for DIY.

Perfect for our toddler’s floor bed. We had an extra queen size mattress and a toddler ready to transition out of a crib. This was so affordable and easy to set up!

I think it's made of pine. The surface is very smooth and nice, but there are some splinters between some of the slats. Not all of the slats lay perfectly flat, but this probably won't matter when a mattress is placed on top. There are two places where the slats are spaced a little wider (so it can be folded) shown in my photos. The slats themselves are about half an inch thick but have enough support that I was able to walk over them and didn't feel any bending or hear any cracking. The Queen size measured 77" L x 59" W. Overall, it is reasonably nice and I'm happy with it.

Even though it’s pricier than other options, I think it’s worth the money. The quality is very good and sturdy. I like that you can put it away if you want to!

I purchased this item instead of one that appeared more polished in photos (and cost significantly less) because I couldn't wait a month for delivery, and was concerned about possible tariffs kicking in. It did arrive promptly (within a week) and does what I need it to do, but I'm not entirely satisfied, and think it is a little overpriced. If I could give half-star ratings, I would rate it 3.5.The boards have attractive graining, and, as other reviewers have noted, are sanded smooth, on ends and corners as well as on surfaces. However, this sanding left the boards covered in a dust so fine that I didn't see or feel it until it got all over my mattress, which is going to take hours of brushing and vacuuming to get rid of. There was also a little pitch from one of the boards that got onto my mattress - there is no way to remove pitch from fabric. I am quite unhappy about these negative impacts on my brand new mattress. I strongly recommend wiping down the boards thoroughly with a damp cloth before placing anything on them, and running your hands over them carefully to feel for any pitchy spots (typically at knots).The support blocks are NOT sanded on the sides, except the sides facing outward at the edges of the platform. Since there are 68 blocks, each with two cut edges (totaling 136), and only 38 of them are sanded, that means almost 3/4 of the block edges aren't sanded. These raw edges are the source of the splinters other reviewers have mentioned. They are mostly short, thick splinters, with blunt ends, below the bed platform, not likely to stick your bed or feet, but I still have to pick one or two out of the carpet every couple of days. The raw edges are unsightly and detract from the quality of the item, s well as raising some concern that the block will continue to deteriorate to the point of splitting at the corners. Also, the non-skid pads on a few of the blocks were glued on crooked. Not a functional or cosmetic issue (since they are facing the floor), but representative that attention to detail in this product is limited to what shows.The boards seem fine for my lying down weight (which is not small), but if I need to step on them, I am careful to step only where there is a support block underneath, as they don't necessarily seem strong enough to support my concentrated weight all on one point.The platform rolls up easily, but when unrolled again, the slats are unevenly spaced, and the ends aren't lined up. I have found a bookcase board is very useful for quickly squaring all of the ends to the same alignment. However, the spacing between slats has to be adjusted by hand every night, since I roll it up every morning. The flexibility of the spacing is not all bad. My mattress has stretched as I have slept on it for a few weeks, and I have happily been able to increase the space between the slats of the platform to match the increased length. Still, I wish I had a space where I could just leave it unrolled all the time so I didn't have to arrange the slats every night.If I had it to do again, I'd have ordered the other platform before I ordered my mattress and waited out the month.

I bought this breathable, moisture-proof bed plate because I needed to move my mattress to the floor for my senior dog, and I didn’t want it sitting directly on the floor. It has been absolutely perfect!The plate keeps the mattress elevated just enough to allow for proper airflow, preventing moisture buildup and keeping everything clean and fresh. It feels sturdy, and I love that it’s lightweight and easy to assemble.This has given me peace of mind, knowing my mattress is protected and still comfortable for both me and my dog. Highly recommend for anyone in a similar situation or looking for a practical floor mattress solution!

The whole thing bends and creaks under minimal weight. The nylon straps feel flimsy too. Just not made to last.

Good quality and even panels. I purchased this for my toddler’s twin bed, it’s great. Not ultra heavy, and the mattress lays super well on it. It’s really quick and easy to put down, it legit takes 2 seconds. Very true to size and sturdy. I’m happy with my purchase.