MAXPRO Skateboard Deck Guards Protector,Longboard Deck Edge Protection,Durable Shock Absorbing Rubber Cover with Excellent Grip Nose Guard and Tail Guard

These deck guards are pretty awesome. Great price first of all. Easy to install and customize. See my pics for how it would fit a somewhat traditional downhill board. My board has some pretty deep wheel wells and one side effect is that those areas are too thin for the guards. I had to cut them to size. They can be sized to fit with a quick trim of a sharp, heavy razor. I would practice the first cut or two by cutting the small piece leaving the rest longer than you need at first, but they can be cut without exposing the clips metal. After about a week of pretty heavy use on my electric I bent one off my board and was seriously disappointed, but the clips bent right back and clamped strong again. Great protection. No need for mounting hardware which is nice if you hate drilling holes in your precious deck. (I do) the only draw back is that with lots of use they can kind of “stretch” but as mentioned the clips can be bent right back. That’s just a trade off for something easy to remove and replace VS something with mounting hardware. I’ll definitely be relying on these for all of my boards.

Well, at first I was concerned due to the no review but like anything you can’t take it for face value.You might think your board need not protect and like to keep it real. But i am wrong, it reall work perfect on my board and awesome useful stops a lot of impact.My best friend got me this skateboard and I haven't taken it anywhere since my birthday... It means a lot to me and i would like to proetct the board deck from damage. I came Amazon and finally choose it. A very thick and durable rubber exterior that definitely saved my board from a guaranteed chip on the nose when I've lost control of my board. It's very easy to install,on the interior of the bumpers there are some metal clips that help the bumper maintain the shape and also help hold the bumper TIGHT to the board.5 out of 5 stars, good aesthetically and it looks like it'll keep my board safe from the off chance I let it slip and slam a curb.I'll definitely update this review when actually ride my board.

I paid one dollar less for the (ZUEXT) version and got half the quality. The ZUEXT comes straight Well.. straight-ish, really kinda bend up and ugly and it is too narrow to fit on the board good, the (Max Pro) comes pre curved & wide enough to fit well & hold on, you can really see how good the Max Pro is when you compare how thick the rubber is, It's way thicker as you can clearly see. It also goes on easier and looks better. So i really really recommend this one you won't find it for a better price & same quality. One issue however is a piece of metal is poking out from one corner & is quite sharp BUT I Just yanked The whole piece out Leaving only soft rubber; No prob. Super easy to install Just MAKE SURE you do it right the first time because pulling it off and redoing it will cause damage

I haven’t used any other deck guard but I don’t think I will either. These guards do a great job protecting my deck and were super affordable. They are made of thick rubber with a piece of metal running through it, so they are beefy enough to take most crashes with a curb or other solid object, they easy form to any shape deck, and they install quick (no tools or anything). If the guard isn’t staying on the deck in some place just squeeze the top and bottom together and it will hold much better. I plan to put guards on all of my decks.

These are very good at protecting your deck’s front and back edges but now that i’ve had these for a few months I feel I can write an honest review. They are good, but not great. They don’t stay on super well so that is definitely an annoying factor when going over rough roads. If you spend the time bending it to form to the edge you want it on, it will fit better. The only other con about these is that they will scratch up the bottom of your deck no matter what. At the end of the day it’s not awful but it’s like “really?” These aren’t bad but I feel there are other better options out there. I think i’m just going to tape my front and back edges instead lol.

Where were these my whole life? A perfect product for someone who wants their cruiser/longboard to retain its value. Most of the damage to non-trick boards is in the nose and tail impacts. These fix that completely, and I hardly think about them even being there after getting used to them in just one or two rides. If I had to say one thing, it's that they should manufacture them with curvature from the jump, as there are subtle ripples if you use them on small longboard ends. Nothing to cry over though.

To be honest I was a little hesitant to buy these. I wasn’t for sure if they were going to be as good as they look / seem. Especially on a boosted board Mini X but I have to say, I am impressed. You can see in my photos that they have been installed and fit well. The only part where you might have some problems is on the back tail, the tail guard underneath sorta blocks these Guards from fully fitting over the tail but I have managed to get my to fit well enough. It’s a good material. It’s tough. I am confident of these to protect from chipping the board. I haven’t had any problems with them yet. I have boosted around with them and they haven’t came off. They fit really tight and well. I definitely recommend.