Alta Labs AP6-PRO WiFi 6 Access Point | High Performance 6.3Gbps Wireless Access Point | Seamless Roaming, PoE+, 4096 QAM | IP54 Rated WiFi Access Point | 4x4 MU-MIMO Antennas for Extended Range

UPDATE - Support Recovered — and So Has My Confidence What began as a frustrating experience with the AP6 Pro has ultimately turned into a much more positive one — thanks in large part to direct involvement from Alta Labs CEO Chase Harrison, who ensured my case was resolved properly when others failed to act. Initially, my AP6 Pro died unexpectedly after a power event involving a POE port on a Route10 router. The performance leading up to that point had been excellent: fast Wi-Fi 6 speeds, a sleek and professional design, and promising integration with the Alta Labs ecosystem. Unfortunately, early support attempts went unanswered or were limited to a generic power cycle suggestion — leaving me disappointed and concerned about long-term reliability and post-sale support. That has since changed. Multiple representatives from Alta Labs and their parent company, Soundvision Technologies, stepped in to not only resolve my issue but also follow through with comprehensive communication and testing. It’s clear that Alta Labs is making a concerted effort to build a better support infrastructure — and they followed through. The AP6 Pro remains a compelling product, and I’m glad to say that Alta Labs is now living up to the potential of their hardware with a customer support experience to match. Original Review: The AP6 Pro had all the makings of a great access point. Wi-Fi 6 performance was strong, the form factor is sleek, and it being within Alta Labs' ecosystem seemed promising. Unfortunately, all that promise ended with a sudden and unceremonious death - courtesy of a POE port on an Alta Labs Route10 that decided to kill the port during a storm. What’s worse than hardware failure? Being completely ignored afterward. Despite reaching out to Alta Labs support multiple times, there has been little effort to resolve the issue. No troubleshooting beyond a generic power reset, no replacement discussion, and absolutely no accountability. “Matt” from support has all but vanished. There’s no dedicated end-user support, and no help outside of narrow business hours — a serious flaw for any networking gear, especially one positioned as reliable and pro-grade. The AP6 Pro might be solid while it works, but be warned: once it's down, it's staying down — and you’ll be lucky if anyone at Alta Labs even acknowledges your ticket.

These do require decent technical skills to set up, but if you have those these are a slam dunk to set up. End result is Wi-Fi that never goes down and is nice and strong. I compared this to Ruckus, InstantOn, and Ubiquiti. It outperformed all but the Ruckus (which is in a very different price class, and they nearly tied), and the controller is much more modern than the InstantOn controller without any of the unnecessary features of the Unifi console. It has what it needs currently and that’s it. Some cool things include multi password SSIDs. Worth the cost to me even now and any stability concerns that were an issue earlier this year in other reviews have disappeared as firmware improves constantly.

The range on this is just awful. If you are in the same room, it works well. Once beyond 20-25 feet, your bandwidth drops by ~90%. For exact numbers; in the same room, I was averaging 750 down and 800 up. 20 feet away, I was at 25 down, and 20 up.

Third time's the charm... started with an eero system which was good for home use but most definitely did not meet my needs as my small business is growing. Then tried going to a Ubiquiti system but did not like the required "gateway" and rather locked in ecosystem...plus overly complicated settings with little explanation or support to all of us who are not network administrators for a living. The Alta Labs products are the perfect balance for my needs...they offer more advanced networking setups but the user interface is far cleaner and easier to understand and the support forums are helpful too! I'll be cheering for these guys, please continue to refine your UI and hopefully expand your product offerings too.

I purchased this to replace an old Aruba Instant On AP 11. The AP 11 was second gen WiFi 5, so not exactly like lightening. The setup was pretty painless. I created an account in the Altra cloud app, plugged it into my POE switch, it booted up and within about 3 minutes, it showed up in the portal, I created the SSIDs, changed the 5GHZ to 180 MHZ so I get maximum speed out of it and it was off and running. My boss didn't even have time to miss me, it was that quick! :) The AP seems to be good quality and works flawlessly so far. It did have a firmware update as soon as it was registered in the portal, that went off without a hitch, very fast.

Alta Labs is moving at a fast pace and heading in the right direction, but this product is still very unstable. A recent firmware upgrade knocked many Apple services like AirPrint and Apple Home offline for weeks. A fix was recently pushed but hasn’t addressed everything. It seems like the AP must be doing some traffic inspection and blocking that isn’t exposed to the user. There should be a dumb mode where it just functions as an AP. Their documentation is also somewhat lacking, and while their engineers are active on their forum, it seems like they’re really only responsive to serial posters. I think this product will be 5 stars someday, but if you need a reliable network, I’d hold off for now. Edit: Updating from 2 to 4 stars. The most recent firmware upgraded resolved all Apple related issues.

Easy setup, replaced my Aruba instant on AP’s, no glitches or issues, most errors are derived from me. I have found taking it slow during implementation and doing research before hand alleviates a majority of the pains that people are talking about. I’m getting more coverage than my Aruba AP’s at higher WIFI throughout as well (400-500 MB to consistent 700-1GB speeds) I definitely recommend this!