Cadet Com-Pak Electric Wall Heater Complete Unit With Thermostat (Model: CSC202TW, Part: 67507), 6825/5120 BTU, 240/208 Volt, 2000/1500 Watt, White

works great

Great heater, instructions are clear and install was easy, turn off breaker..connect ground, on the 240v version both black wires are hot, so very straight forward...Make sure yo order the correct voltage model, comes in two flavors, 120v and 240volt...

it's small and cheap, probably 100's less than other brands. however, hookup was easy as the existing wires were already in place. the unit puts out plenty of quick heat. no vents to hookup either. this heater was a third the size of the old heater, so I had to do some quick framing and drywall repair. i guess the new heaters don't need to be as big as the old ones...

Do yourself a favor and when you install this unit, wire it through your own wall thermostat. 1 week after my install, I went into my shop and it was like 80 degrees and the thermostat was set to the off position. I have bought 2 of these, they work great but if the thermostat goes out, it will run constantly!!

Worked as stated. Would buy again if needed. Last one lasted over 30 years.

Just what I wanted and it works to.

Ya know...I'm willing to accept half the blame for this particular mistake. But in my defense, it could be argued that I was set up. 🤨Case in point... I wanted to install an electric heater in our bathroom. Not a complicated project as far as projects go and have many under my proverbial belt. Went on Amazon and picked out a Cadet heater. This brand, if not this exact unit, is also offered at Home Depot so it's not like it's TOTALLY cheap scrap.At the time that I ordered it, I was still bouncing between mounting it on the wall or possibly the ceiling. Looking at the company's website, and as indicated by the screen shot shown, I could do either with the heater I ordered. Nice to have that apparent option.I ended up installing it in the ceiling. I installed a dual pole thermostat on the wall, set the thermostat on the unit itself to high, and fired it up.About two minutes into running, the over heat protection kicked in, shutting it down. Hummm... THAT'S not a good thing. 🤔Well, when all else fails, read the instructions. 😏Soooo... Contrary to their statement of "ALL" 1500w heaters can be ceiling mounted, the ones with built-in thermostats are "not recommended" to do such. Got me there guys. 😣I will be calling them on Monday to see what we can do about this. Again, I'm willing to accept half the blame, but I'm curious as to what THEY are willing to do. At the same time, I will be inquiring as to exactly what the difference is between the models that have a thermostat or don't. I am a tad concerned that the over heat protection is kicking in. If the only difference between the two is the lack of an internal thermostat (which I can physically remove on THIS one), then that won't really solve the problem. The over heat protection should NOT be engaging. Period.To be continued...

We bought this to replace a similar heater with the digital thermostat that the heat adjustment button broke. This heater is much simpler to operate. Turn the knob up to start receiving heat, and turn it down to shut it off. When you turn the knob the heat is instant and quickly warms the room (in our case, the bathroom). While I can't tell what the temperature is, the built in thermostat turns the unit off when the temperature reaches that temp. It starts if back up when the temp falls below the built in thermostat. Installation was simple for us as we already had wiring for the previous heater. So far, this is perfect for us. We highly recommend it.