FLASHFORGE Adventurer 5M Pro 3D Pinter, 600mm/s High-Speed with 1 Click Fully Auto Printing Systerm, Quick Detachable 280°C Direct Extruder, Auxiliary Chamber Cooling, Remote Control, 220x220x220mm

I have had it for over a month now and I have gone just one day without printing something. Right out of the box, it works wonderfully and is a lot less hassle than the reviews led me to believe. In fact, I tried tinkering with settings when I thought it needed it a couple of times, when really, all I needed was to calibrate the machine from the app on my phone (or from the device). Very simple! Setup was easy and with OrcaSlicer, prints are very easy!To be fair to some people who have complained, I had to learn to use the calibration option a couple of times when prints didn't look great or they started off not too good. Auto leveling helps a lot too. That's perfectly okay. You can't learn if you don't mess up a few prints. I am still doing that, but my successful prints are far more than the ones that don't turn out. I have also learned that it helps to modify the gcode to print a line before it does it's nozzle cleaning routine, to get the first piece of filament out of the way.As a word of caution, don't use ChatGPT. There isn't enough content out there to draw from and so it will give you bad advice! Printables.com is your friend.It's quiet, clean, and fun. Definitely worth the purchase!

Having several printers (Bambu, Creality, Anycubic, and now this one), it's easy to fall in love with the printer.Well Built and its Speed & Quality beat most of my existing printers.Bought 6 of them and will probably order a few more (I own a small print farm).I chose the Pro version since if I bought the regular version, I would add the enclosure + camera, and probably order a 0.6mm nozzle. If you add the costs of all of those, you almost reach the cost of the Pro over the regular one.The printer is noisy. The nozzle cooling fan seems to be running at high speed and causes "some" noise. I will explore how to silence that one.Another Issue you might end up with is that the PTFE tube of the filament seems to be a bit longer on some of the printers I got. This causes it to touch the top cover and stain/scratch it. So, before running some prints, verify if it touches the top cover. If it does, I would recommend cutting it a little (1/2 Inch).

First time ever using a 3d printer and this one is amazing. Been printing with it non stop since we got it. I would definitely recommend getting the DIY enclosure kit for it but be prepared to get a few rolls of filament just to make the enclosure. The sound reduction from the enclosure is a definite must in my opinion. So far the only failed prints I have had have been from my own fault. Would recommend to make sure what ever you have the printer sitting on is very stable because it will shake from the printing if you have it on a flimsy table. Would definitely recommend this one for beginners like myself. Changing the nozzles is extremely easy as well. I made the mistake of not checking to make sure the filament sensor was on and ran out of filament when my kiddo was trying to print a movable dragon (see photo). The sensor by default is turned off. Would recommend making sure it’s on. Also included a photo of the enclosure we made for it with the DIY kit.

I received this printer on Feb 14th and through the holiday weekend I spent probably 24 working hours troubleshooting and trying to diagnose issues with this printer. I've attempted to use orca, cura, and flashprint, and none of them provided consistent results.Print success rate - My print success rate with this printer was probably 10%, with 90% of prints failing. I've auto leveled, vibration tested, manually leveled using the paper method, tried 4 different filaments (all PLA), modified probably 20-30 different settings at least 20 times each. Nothing I did would get the filament to extrude consistently across the bed. The bed also bowed up in the middle, so when the 4 corners were level the middle would scrape.Print quality - The print quality was actually really good, and quick when the print would work. I came away with some decent small prints, but could not successfully print anything taller than 20mm.Adhesion - I attribute a lot of my adhesion problems to the uneven first layers due to horrible extrusion, but unless I used a brim with everything, the print would eventually warp in 1 of the corners and eventually either fail or have terrible print quality. Some prints the hot end would eventually iron out the surface and it would succeed, but would have an uneven base.Build quality - The build quality was solid, it felt very sturdy, and built like a tank with only the base being plastic. My printer did develop a buzzing sound when moving along both x and y axis.Overall I can not and refuse to recommend this printer. Despite the good print quality, if I have to troubleshoot after every print and only 1 in 10 succeed then print quality really means nothing.Check the reddit for flash forge and the new 5m printers, my experience is not uncommon. Some youtubers are raving about it, and maybe they received a good unit, but the inconsistency with this product is awful, and you're taking a big gamble if you purchase one.

This is a fantastic printer. I am actually going to be adding more of these to my printer lineup. I like the fact that they are enclosed and I can print Asa, abs, tpu, pc, petg, TPU, pla and carbon fiber filaments. Comes with .4 and .6 nozzles. Quick and easy swap out of nozzles. Only thing that I would change would be print a side spool holder versus the one that comes on the back of it. Touch screen works great love the fact that it auto bed levels. Virtually zero assembly. With the lid down you do have some noise but no different than any other printer. I would highly recommend this product