Mr. Tronic Bulk Cat 7 Ethernet Cable 50m, High Speed Pure Copper LAN Ethernet Network Cable, 600 MHz 25m Bulk Cat7 Internet, 10 Gbps, ADSL, SFTP 100% Bare Copper (50 Meters, White)

Beware. The core of the wires are very thin (28 AWG). This makes this cable almost useless if you intend to use it for power over Ethernet (POE) devices. It did not work for me when I tried to use it for a PTZ camera. Had to switch to a 23 AWG cable. The thin strands also make it tricky to fit end connectors as the teeth can miss the thin core when crimping. I had a hit and miss experience with crimping.

Each pair of colours are shielded together before being completely shielded with all the other wires. Very well made and light in weight. I fitted a connector on each end to test the signal and I had no issues. I got the purple colour, however black, and white is also available.

I really wanted to like this cable – the construction looks excellent, with solid shielding and insulation that feels premium for a 50-metre Cat7 cable. However, all that is rendered moot by a fatal design flaw: the inner conductors are far too thin to make consistent contact with standard Cat7 or even Cat6a RJ45 plugs. After an entire afternoon of troubleshooting—thinking it must be faulty plugs or maybe even a bad batch of cable—I tried a range of different connectors, including shielded plugs, unshielded, keystone jacks, and more. Same issue every time: the crimping teeth fail to pierce the wire insulation properly or completely miss the wire core due to the unusually narrow spacing of the inner conductors. The result? Intermittent or completely dead connections. Ironically, the only plugs that worked were old Cat5 connectors, where the internal channels are tighter and force a better contact with the thin wires. But that defeats the entire purpose of buying a Cat7 cable in the first place – what’s the point of high-spec cable if you have to downgrade the termination to make it work, and even then it’s hit or miss? Conclusion: Don’t buy this cable. No matter how good it looks on the outside, it’s not fit for purpose. You’ll waste hours trying to make it work and still end up with unreliable connections. A poor investment for anyone expecting performance and reliability.

Husband brought it as provides a better connection for tv's and computer upstairs .

Bought it as was expecting solid copper cores, BUT NO !!!!!! These are stranded and very thin. Installed Reolink Poe cams and would not work with them. Return within 30 days now I’ve installed the cable ! What a joke that is. I’m so disappointed. Please make sure contact the seller prior to installing anything to ascertain the compatibility of the cable. I feel cheated and sold a dream.

Ok

The cable appears good quality with plenty of shielding on the pairs and under the insulation. I now get 1gbs to the office from the router about 35meters away

Terrible Cable, bought for new extension and cabled throughout only to find I cant terminate the cable on any keystone, punch down wall plate. Not solid copper wire, its stranded 28awg which is really difficult to find suitable RJ\GG45 connectors for very disappointed as I cant remove it or send it back so I am stuck with it. should have purchased standard cat6a from a better supplier don't waste your time, get a better quality cable.

Génial

Top cable, very solid and reliable

At first I was not clear reading the reviews why some purchasers were raving about the cable, while others were bemoaning the evident fact that the cores are not solid copper as depicted but skinny strand. Apart from representation and performance issues, this makes it really difficult to fit plugs. Then I realized the cable is available both with and without plugs which might explain different assessments between those purchasers who see the stranded cores and those who don't. But still not a good idea to have a solid core in the photo. Last thing: I developed a quick and unorthodox method to fit the plugs after a lot of frustration. I stripped quite long sections of core and threaded each one by one through a pass-through plug and then crimped in the normal way. That way, each plug took about 3-5 minutes tops and worked.

Premetto che non sono un tecnico informatico, ma semplicemente un autodidatta. Ho deciso di acquistare questo cavo Cat7 per aggiornare la mia rete di casa, cablata tanto tempo fa con cavi cat5e, visto l'avanzamento veloce ed i prezzi ormai standardizzati, credo che tra non molto avremo la 10gbs al prezzo della 2,5gbs(o 1gbs), ciance a parte, parliamo del cavo in se. Si, confermo è un cavo multifilare, quindi quando si acquistano i connettori, bisogna prendere quelli per multifilare o meglio quello compatibile con entrambi, multifilare e rigido. Prima di metterlo in funzione ho inserito 2 connettori rj45 per cat5e per testare se il cavo ha interruzioni, dal video si può vedere l'integrità dei 50 metri, la stessa bobina poi l'ho collegata al GPON e poi al mio Router (uso un Gli.Net Flint 2) per testare la linea e dai risultati dello Speedtest lo potete notare. Molto probabilmente chi recensisce in negativo il cavo per la multifilarità secondo me lo fa perchè non ha i connettori adatti, io per il momento non ho riscontrato nessun problema. Il cavo non è rigidissimo ma neanche morbidissimo, è un cavo lan di buona qualità forse non superpremium, ma per un uso casalingo per me và super bene. Lo consiglio ad occhi chiusi, consigliando sempre si di leggere le recensioni, ma prima di scartare un prodotto perchè il primo malcapitato di turno che non sa crimpare perchè non utilizza i prodotti giusti reputa negativo un prodotto, consiglio vivamente di raccogliere ulteriori informazioni, per esempio ormai il primo in assoluto consigliere (Chat Gtp). Prodotto super consigliato da utilizzare sia con strumenti e connettori adeguati. Amazon super eccellente.

Fait ce qu'il doit faire