Dynofit 2 Inch Leveling Lift Kit for Tundra & Sequoia, 2" Front Raise Suspension Strut Spacers for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023 2024 2025 Tundra

I purchased this product to facilitate tire clearance around the inner fender of my 2018 Tundra. I purchased 275/70R 18 Mickey Thompson Baja Boss ATs to replace my stock 275/55R20 Bridgestone Altima HLs. The stock tire was 31 1/2" tall. The new MT Baja Boss ATs are 33 3/8" tall. I did purchase Method MR315 wheels that have a +18mm offset compared to the stock wheel's +60mm. This moves the wheel and tire combo outward approx. 1". My truck in stock formation would impede the tires and the tires would rub on both the front and rear mud-flaps. After removing both the tire would still rub the front inner-fender as before. I adjusted the plastic inner-fender forward, away from the tire. (Youtube has several videos demonstrating this.) However, my truck still sat nose down 1 3/4" from the rear. I installed this lift kit and now my truck sits more level. The kit comes with illustrated instructions that readily guide you through the necessary steps to install it. I found the product well manufactured, with the fit and finish exhibiting a machined appearance. An excellent finish is provided that will likely outlive my truck. The kit also includes the bolts, lock-washers and flat washers. On Toyota Tundras the lower A-arm alignment bolts are very tight, as is the lower coilover bolt. These with necessitate either an air-impact wrench or hand tools with a considerable amount t of grunt to loosen and retorque. These will consume your time the most. Otherwise, this product installed fairly easy. Maneuvering the coil-over assembly to install the first bolt through the frame-mount will challenge you. But, patience will win the day. I did not require another alignment on my truck as I marked the alignment disks on the lower A-arms prior to loosening and found them identically located on competion. Value for the money is exceptional. Given the fact most other lifts or leveling kits will demand more money.This is an excellent product. I recommend them to anyone wanting to level your ride.

Good product, easy install. I did it myself. Took about 2 hrs, 2.5 hrs if you include gathering tools. I've done several leveling kit installs before. This one being theost straight fwd. Most difficult part in my opinion would of been lining up the upper strut bolt and spacer holes. I used a mechanics mirror on a telescoping pen with a light to see the angle and turned the strut left or right to line up. Also, lining up the lower strut mount bolt can be challenging. I recommend having a long bar, preferable metal of some sort and a friend pry down on the lower control arm as you line it up and install. Overall, I'm pleased. Leveled my truck just as I wanted and was a fairly easy install. I torqued it all down to specs. Will set how it holds up.

I have these on a 2007 Sequoia that already has OME 2.5 or 3" lift springs. This netted me 4.5 of lift for the front once settled (was like 5.5" until the springs settled after a couple months). You can do it alone if you have a big enough bar but it is much easier with a buddy. It's a bit of a pain to stuff them back in, but doable for sure.

After a couple hours putting this on my 2020 tundra, had to get spring compressor to slightly the spring. And now there a rubbing sound from the cv I will be lowering the differential with the other kit to see if this solves the issue.

Installation was kind of a hassle but it's not the item's fault.

I love the leveling kit. I'm a mechanic by trade and took my time with it. Install was a little frustrating but with patience, it can be done. I wouldn't recommend this install for someone who isn't moderately experienced in suspension. But, if you do decide to DIY, there's always YouTube. MAKE SURE TO GET ALIGNMENT AFTER INSTALL!

2018 Toyota Tundra SportAfter installing spacer onto strut, I realized the spacer threaded holes do NOT line up with the truck frame mounting holes. Not sure if others who purchased this item had 4x4 or not but it definitely does not align right!! Red flag should have been the instructions that were provided. They provide no torque specs for securing the product (safety concern) and it looks like it was typed up by someone’s elementary school kid. Save your time and money and just buy a complete adjustable suspension kit.

Easy to install, worked great overall. Lifted exactly as expected.

Fit to my friend’s tundra!

Satisfait

It was what I wanted

Instructions and details are clear. It took me the better part of a day to install. Not overly complicated but a job to tackle as one person on the ground. Will see how everything holds up.

Mechanic couldn't get it to fit my 2007 4WD Toyota Tundra