NANPU Light-Duty Air Sandblaster Gun Kit with Gravity Feed, Ceramic Nozzle, Metal Body, for Small Project Surface Prep, Paint & Rust Removal, Metal/Wood/Glass Etching, Requires Air Compressor

Works as advertised for small projects. easy to use.

This is very easy to use. Great value for the money. Works well for golf club heads. Size is compact for storage. 1 key observation: The glass sand media goes literally EVERYWHERE. I built a chamber using a clear storage container with a locking lid. I cut out one hole big enough for my hand/forearm to fit through AND I taped off a piece of plastic over the hole & cut an "X" shaped slit in it. I then cut a hole on the side, just small enough for the nozzle to fit through. WOW does the media find any tiny nook to fly out of... BUT my method still saves a lot of the media for reuse. However, I now need to find a way to filter it so that all the junk that comes off a golf head does not end up mixed in with the sand.

This product works good from the hopper or little tank , I have other sandblaster products from Campbell hausfield , that I use for bigger projects, I tried using the hose and hooked it up to a bigger reservoir, and it works for a while , but I think with the humidity, and not having a bigger water filter that it would work better , for small projects the little hopper is great , I was using a mixture of sand and black beauty, not the great time to be doing sandblasting in the heat anyways, go to harbor freight and get a hood , the goggles did work for a while

The nozzles are to large and it goes through the sand very quickly.

It works, but a lot of sand comes out of the end when you’re not pulling the trigger

This one works MUCH better than the cheap one I bought years ago. This one doesn't clog.

Others have said similar in their reviews. I wish I would have paid attention... and tested my compressor. I have a 180 psi max pancake compressor that works great for my nail gun and my paint gun. Unfortunately, it can only maintain a static 60-70 psi with continued use. So, the first blast with this thing takes off a slight bit of paint/rust. But, continue to use it, and it just doesn't work. This thing may be a nice budget-friendly purchase, if you ALREADY have a $500+ compressor that can maintain high pressure.

I ordered this hand-held blaster for a small project where I need to strip and repaint some mild steel sheets. It arrived today, and after giving it a quick test, I’m happy to say it works brilliantly! In the video, I’m blasting a scrap piece of mild steel square tubing I had lying around. It’s been in my garage for years and was covered in mill scale and some rust. I’m using 120-grit aluminum oxide as the blast media with the hopper (not the siphon). It may be hard to see clearly in the video, but the finish after blasting is absolutely beautiful—totally clean and velvet-smooth. For small projects like car parts, I think this blaster is going to be incredibly useful. Quick tip: If you’re using the hopper and you point the gun downward before pulling the trigger, the blast media can spill out. Start with the gun level as you pull the trigger, then move to a slight downward angle while blasting.

per piccoli oggetti è comoda, per superfici più grandi il serbatoio della sabbia è piccolo

Gut

Super macht Spaß

Pienso que se necesita un buen compresor , con uno pequeño la pistola no rinde bien

Catastrophique très déçu de mon achat il ne fonctionne pas