Bilstein24-196284 Single 5100 Series Front Steering Stabilizer fits 2008 2016 F250 F350 Super Duty - Reduces Steering Vibrations - Improves Handling

This Bilstein steering stabilizer is of very high quality and looks great, very superior to the oem stabilizer. Take my advice and order a cheap “pickle fork” or ball joint separator tool when you order this stabilizer to help you remove the old stabilizer from the drag link, with this tool the entire job will only take you 30 minutes, without it, it may take you 3 hrs of trying to beat the thing out! I installed this on a 2016 F250 and it fit great. My truck has about 55K miles on it and the stock stabilizer was fairly worn out and no longer decompressed. After installing, the steering is tighter and no shutter when hitting rough spots in the road. I don’t think I would call it “night and day” but it is an improvement and looks great. You’ll need a 15 mm socket, an 18mm deep socket, and a pickle fork and decent sized hammer. Unit comes with necessary hardware (you will reuse the oem bolt on one end of the shock and supplied nut and washer for the other end).

The media could not be loaded. It's easy to install

I installed this on a 2008 f250 and immediately noticed a difference in stiffer steering. Install was very easy and you don't even need to lift the truck but you will need a pitman arm or tie rod puller or you will be hammering at the bolt all day.Took 15 minutes to replace.

Perfect fit and fast shipping. Works great!

I had a harder time removing the OEM stabilizer than installing this new one. This Bilstein felt much sturdier and well built than the OEM one. I haven’t noticed a drastic difference in driving performance but I drive confidently knowing this is a high quality part. Leave the plastic cable on until you’re finished with the install so you don’t have to fight it as much when you’re getting the bolt and nut lined up. Lastly, just make sure to torque the bolt and nut to the proper specs and enjoy the drive.

Installed in F350 to address 'death wobble'. Still working longer than cheaper brand did.

Awesome! I received the stabilizer and immediately installed it on my truck. It took about 30min to install, super easy and fit right into place. The factory stabilizer was shot, pretty sure it was original and never been replaced. Truck has around 156k on it and had crazy death wobble. After installing I took it out for a test drive and it was awesome. No more death wobble and it has taken 95% of the harshness out of the steering wheel.

I have a 2016 F350 and started getting the death wobble. I tried another “RC” brand and it actually made the problem worse. I purchased this bilstein damper and it was a big improvement. I’ve had it on my rig for 25,000 miles and is still holding strong