2 Pack Lower Hose Fit for Tineco Floor ONE S3 IFloor 3 Handheld Vacuum Cleaner, 1" Lower Duct Hose, Vacuum Cleaner Connect Tube

These are a good replacement

Exactly what I needed to fix a low suction issue due to a split hose.Easy replacement, kit came with 2 hoses, 2 tubes of adhesive and a small torx screwdriver that was not necessary on the s3.To replace, remove all of the screws on the under side. Slide the plate with the rubber fin towards the brush roller side of the head to remove, there are 4 screws under that which need to come off too. Once you have the cover off, you’ll need to use a pliers to pull the old hose out. I snipped the coil and yanked it out, then pulled out the vinyl skin. The new hose screws in, practice before using the adhesive. I screwed the top part of the hose as far as it would go into the neck, then screwed the other end into the bottom part. Make sure you tuck the black and white wire and the clear hose into the head or the cover won’t go on all the way. It’s a super easy job, hope that helps!

This is the correct replacement hose for the Tineco Ifloor3. The hose is very prone to cracking as mine has cracked twice.

Perfect fit and work good

So thankful that this part was on Amazon, and I didn't have to order it from the company. After finally figuring out what was wrong and getting the right part, it fixed my Tineco!!

I have a cracked tube in the tineco ONE wet/dry mop. These are not too bad to change out but the silicone/rtv sealant stuff that comes with it just takes forever to dry. You can buy a quicker dry version that does not come with this, probably for cost reasons. Fits well and does what it needs to do at a good price.