Universal Security Camera Mount Junction Box For Most Bullet & Dome camera

Great for dome cams. I had to drill and tap holes to mount my camera in the cover, but I expected that ahead of time. Works well with Reolink D400 dome cams.

I am only guessing, but I believe this box is perhaps made to metric standards. None of the holes line up to standard US fittings. I was intending to use this for a Foscam camera which has standard US pre-drilled holes, which means it lines up with the screw holes in any standard box you can get at Ace, Home Depot or any other electrical or hardware store. I liked the kit, however, with the insulation and covers and it was large enough to fit my excess unused camera leads in it that I am currently not using, so I bought it. Unfortunately, nothing lines up with standard US electrical. Additionally, I noticed that the mounting screws included are different from the US standard. When I checked it out at the hardware store, they fit perfectly in the metric sizer.

Overall, the junction box is a product I am happy to have purchased. It fits the base of any of my domes or bullet cameras. The all metal construction and casketing is nice. This is perfect if you are NOT going to run any conduit into the sides of this junction box.If you need to use one of the 3/4 inch threaded openings for attaching conduit, then be prepared for frustration. The threads are cut too shallow in this box. None of the 3/4 inch conduit connectors (metallic, non-metallic, or liquid tight) at the orange, hardware emporium will fit. The diameter of the openings are high and so is the thread pitch. They simply are cut too shallow to accept any standard connectors. I ended up "misusing" a 1/2 inch liquid tight fitting to make things work by using the connectors nut to clamp the connector in place. The threads of the junction box were not used.

This is a really nice aluminum box with aluminum cover. It's also the cheapest I could find. The holes in sides is 3/4" FIP for conduit etc. There's a hole in the back/bottom that's approx 1" so 1" MIP fittings go through it.The hole in cover is smaller maybe 3/4". It's not very deep so fitting baluns or POE splitters is very difficult to fit everything.The included screws are self drilling and a bit too long at about 3/4". Be very careful screwing them in if wires and adapters are inside box. The screws could easily go into wire etc. It works just fine for a POE cam

This item worked out great for hanging my cam under the eve and has lots of room for the cables. The cover plate was easy to drill thru and with a few #6 screws and nuts provided by me the cam was securely mounted.

I bought 2 of these for my Hikvision DS-2CD2042WD-I cameras. I wanted something that would match the white as well as conceal the cables to prevent tampering as well as keeping them safe from the elements. I finally decided on this product. So far I'm very satisfied with it. The product shipped quickly and arrived before the predicted date.I've attached pictures of the cameras I mounted on the house, they look very good. If you're in the market for camera mounting plates I'd definitely recommend these!

I think this will be a good alternative for the Reolink RLC-520 camera. much cheaper option and i just drilled 4 new holes in the plastic reolink base plate.used a impact driver to sink the screws in flush into the reolink plate. I included a picture of the Reolink box too. The Reolink box is way to big and ugly looking.

Description states this item is 1"h. It is almost 1-1/2" (1-3/8" exactly). You should change the description.