Super Slick 2000 Epoxy Bottom Coating for Airboats, Jet Ski's, etc.: Gallon Kit

Good Quality, mixes as it should and easy to apply so long as you follow the directions. would buy again.

I used this on my pontoon boat in the ceramic river to keep the algae off the bottom of the toons works great boat picked up over 5 mph compared to a dirty bottom

This stuff is super slick, it’s kind of messy. I rolled the 1st coat and brushed the final coat. Rolling didn’t get it very thick. I had enough in the kit to do the bottom of my boat and the transom. I sanded the bottom, etched with alumibrite, painted with BLP MoPoxy, sanded the paint, rolled on 1 coat of super slick, let dry for 3 days, sanded the super slick with 180grit, and brushed on the second coat.

Best product on the market!!

This stuff is slippery! I can slide my boat on the trailer with 1hand, may be difficult to launch! Lol

This stuff is amazing. I bought the 1 gallon kit and was able to do two boats. One was a 18’ duck boat and the other was a 16’ bass boat. This stuff makes launching super easy. The boat will slide off the trailer if you’re not careful. We run our duck boat in the mud and beach it all the time and this stuff holds up.My bass 16’ aluminum bass boat has some electrolysis on the hull and leaks a little, after two coats it doesnt leak any more and is super easy to clean scum off the hull. Both boats took two coats. One was a painted hull and the other was bare aluminum. We sanded both hulls and cleaned with acetone and had no issues. I recommend mixing a quart per coat. Use a good solid foam roller that won’t come apart this stuff I thick and sticky and will pull apart cheap rollers and you won’t get a smooth finish.

Awesome product. BUY A FEW SHED RESISTANT ROLLERS.I USED FOAM ROLLERS. Knap rollers fall apart in the epoxy

The out come of this product exceeded my expectations. It sealed all the rivets and made the bottom super slick I guess that the correct name to call it. 1gal will coat the entire bottom and both sides up to the middle rib on a 1656. I started to use a tray and a roller then ended up just pouring it on using the roller to main push it around to coat everything.The only complaint I had was the parts you add the color to was clumpy and took forever to get the clumps out. This being my first time using this product and applying it I would totally recommend it.