Solera Universal Slide-Topper Replacement Cut-to-Fit Fabric for 5th Wheel RVs, Travel Trailers, Motorhomes, 50' x 48" roll, Black - 432253

Compared to what an RV repair shop charged me to replace the fabric on a motorhome slideout awning topper, this is a SUPER DEAL! Exactly the correct size, and the two plastic ribs preinstalled on each side of the fabric made installing this fabric easy. Cutting it to size is a breeze when using the old fabric as a guide. The two toppers on my motorhome are 7’ and 25’ long. I replaced the short one. So I’ve still got enough to do the short one TWICE more AND the long one once. My advice is to replace the fabric BEFORE it completely rips off your motorhome. Once that happens, the springs unload. It’s not too difficult to retention the springs; however, you have to know how many turns to rotate the tube to achieve the proper tension without over doing the springs. If you see your awning topper fabric beginning to tear at the ends where it is affixed to the motorhome, order this material and get the job done ASAP. You will thank yourself profusely. For those wondering, the shop charged me $815 to replace the 25’ fabric after the material had ripped off entirely. Consider that the fabric cost them $85 at most!!! That’s a seriously nice profit eh.

Installed this product on one of my Motorhome slides. Been over a year and still holding up really well. Great product.

A little bit of work but with another person job went. Should last me several years.

I replaced two slide toppers, a 13' and a 7', swapping out some 23 year old OEM pieces of fabric that had lost all their will to survive. This was a fairly easy project on a couple of A&E Dometic units. A couple of ladders, a willing wife and measuring twice, cutting once, we got it down in a couple of hours. I hope that they last half as long as the OEM. They look good, they work well and I'm sure I saved a bunch money. I like it.

What a deal, 50 feet of awning material in a convenient roller box that is easy to use. The description doesn't tell you its 47 inches wide. Find a scrap piece of thin plywood and stick it under where your cutting. Use a utility knife to cut it. I used a framing square pushed against the cording on the edge to get a straight cut. My awnings had the material held on the roller using 1 1/2 inches of the cording sticking out on each end so I cut it 3 inches to long then trimmed the 3 inches off the awning leaving the cord long and pulled it back 1 1/2 inches. Took about 30 minutes per awning with enough material to do my trailer 3-4 times. Seems to be quality material heavier than OEM.

Awesome deal. Really good quality. Easy to install. I was a little worried that I wouldn't be able to cut it straight as the original and it wouldn't look as nice. However, when I removed the original I found that it wasn't straight at all! If never noticed it before. I used a utility knife and a scrap piece of plywood to back it. Then I used a large framers square as a guide and cut it much straighter than the original. Went up in place easy peasy. I have a 33' bumper pull with two slides. With what's in the box I have enough to do both slides twice for the price I would have paid for 1 of the better quality slide toppers that were pre-cut for my size slide. The material is much better quality than the original.

Perfect replacement slide topper fabric for our 2016 Tiffin Allegro Bus. Ended up with more than 50 feet, which was awesome because we didn't expect to have enough to do all four side toppers, but we did. The job wasn't easy, but we managed to get them all done in five hours total. Used the next day to recover lol.

This roll of Solera slide topper fabric was a so much cheaper than having professionals to replace topper material. It comes in a 50 ft roll that already has the plastic cord sewn in to it. My husband and son were able to replace all 5 of our slide toppers. We found the easiest thing to do was to manually roll out the topper all the way and then use a clamp to keep it from rolling back up. You don’t want to let it roll back up until you get the new material slide in the rails. Otherwise the spring on the topper mechanism will be really hard to turn back in. It took a couple of hours and we had all 5 of our changed. We just pulled the roll out and laid the old on top for a measurement then cut it to th same size as the old topper. Hope this helps. I added pics of the clamps used.

Good quality. Saved tons of $ by doing it myself. Relatively eady installation, best if 2 person.

Great product for the price

Good material & good shipping. BUT the headline gave two numbers but didn't appear to be anywhere to select which one I wanted. One number was for black & the other white. Wanted white but got black.

Very happy with the product quality over the RVs original equipment. Install was simple with 2 people. NOTE- use caution when cutting off first section. The leading edge which I initially used for my measurement was not straight. Panel was loner on one side by almost 3 inches from the other. Used a square to set a straight line, cut and then redid the measurement. SUCCESS!

produit de remplacement recommander