THE CIMPLE CO - BNC Compression Connector for RG6 Coaxial Cable - Male RG6 BNC Connectors for Security Cameras, CCTV, SDI, HD-SDI - Coax Cable Ends 10 Pack

Great

These will be my go-to compression connectors for SDI moving forward. Installed 10 of them and all cables worked reliably from the get-go. There are no instructions provided as far as I could tell, but what worked for me was to strip off 3/8” of outer jacket, fold the braids back, and remove about 1/4” of cladding from the center conductor. The cable seemed to seat fully in the center pin and no excess braid stuck out once crimped.

I’ll admit it—the first CIMPLE CO BNC Compression Connector I crimped didn’t exactly go as planned. Turns out, cutting the insulation to the wrong length makes for a pretty sad-looking connector. That one didn’t just fail; it humbled me in front of my tools. But hey, live and learn, right? The good news is, these connectors are forgiving if you aren’t perfect on the first try. Once I got my measurements sorted (because, yes, precision matters), everything went smoothly. The connectors locked in like a dream, and suddenly I was back in control of the live video feeds at church. The quality was flawless—no signal drops, no static—just a crisp, dependable connection that even the pickiest AV enthusiast couldn’t complain about. In the end, these connectors earned their spot in my kit. If you’re willing to measure twice and cut once (okay, maybe twice), these little guys will reward you with rock-solid connections every time.

I have purchased two of these 25-pack BNC connectors. They have worked perfectly except for one flaw. They go onto the RG6 cable exactly as expected, and once properly crimped they are a tight connection that won't pull off. I suspect people who state they pull off might either be using the wrong cable (e.g. RG59) else aren't crimping the connector properly. The one flaw I've discovered is that some of these connectors will not slide onto **any** device BNC connector. After discovering this, I have to first try to attach the connector to the BNC port of a device I need to use. If it slides on easily, it's good. However, I've discovered that 15% to 20% of the connectors in a pack of 25 are too tight and will not slide onto the device BNC port. So I have to toss that connector aside and move on to the next one. Doing this test first avoids needing to find out the connector is defective after it's been attached to the coax cable. Like I said earlier, if these connectors fit, they're quite good. Just look out for the connectors that can't be easily connected to the BNC port of you're target device.

Not much more to say than the title. I've used a bunch of different compression fittings from different companies and these are the best by a mile. Assemble easily. There is a small gap between the sleeve and the body that allows you to visual confirm the coax is seated in the connector. The inner pin is already in the connector and is machined such that the center conductor easily inserts with a little give that you can feel to tactically confirm the connector is assembled correctly. Once compressed, the connectors are on tight and don't work loose or come off. I've installed nearly 300 of these now on RG-6 for SDI signals and I don't think I've had a single failure. Other brands, I'll typically see 5% to 15% failure rates. Please don't ever change these connectors or stop selling them! These are the only ones I'm buying going forward!

A+++ extremely solid and well-made. Great connectors. The first couple of tests I did came out perfectly.

BNC connector for RG59. they work well, make sure that they positioned strait in the crimping tool, as they tend to crimp in full on one side, leaving a gap on the other.

I have been using Belden BNC connectors with Belden 1694A RG6 for a long time and was looking for a cheaper alternative. The CIMPLE BNC connectors are by far the worst I have ever tried. Each time I attempted to insert the connector, it would bend the copper of my cable to the point it's unusable. After several tries, I eventually got the connector pushed on all the way. But then the copper tip of the connector got pushed out too far, to the point it wouldn't even fit in my compression tool anymore. I was hoping these connectors would be as simple as inserting on the cable until you hear a snap, compress, then done. Unfortunately that was not the case for me at all.

Works just fine. Easy to install.

Excellent product.

Very inconsitent quality. Out of the 25, 16 worked and the other 9 shattered. Won't be buying these again.