KRYDEX IPSC USPSA IDPA Competition Shooting Multi-Angle Adjustment Speed Shooter's Pistol Magazine Pouch Mag Holster Holder

I like the adaptability of these mag holders. Fits Evey magazine size and shape. Very sturdy and sound construction. They hold the magazine just right with adjustable tension , even great for upside down carry if you need too. I have purchased another set. If you have magazines and need them attached to your body or bag, then these do the job and then some.

I ordered one of these to pouches to test it out. Loved it so much I ordered 4 more. These pouches are identical to the Black Scorpion pouches. Exactly the same. The only difference is the Black Scorpion emblem. They are fully adjustable. They have a swivel tension mount so you can rotate them and cant them towards or away from your body. You can also raise or lower them on the belt mount. The only negative I have is that it takes a bit to get them mounted on the belt so they don't lend well to a rig where you're swapping or moving the pouches often. Other than that, they are a great value. One recommendation is to use Loctite on the threads once you get them to where you want so they don't loosen and move Mainly the main screw that holds the swivel mount.

The actual design and quality of these things are awesome! You can adjust it almost any way you want it, to include the type of mags you’re carrying. BUT!!!!!, the little bracket where your belt feeds in to is small. For example, I used it on my 5.11 tac belt which is 1.75 inches wide, and it was too big to fit inside the little notches/lips (whatever they’re called) of the mounting bracket. So I have to cut the notches a tiny bit wide so the belt could fit perfectly snug and I’d be able to screw it down. After it was done however it turned out to be the best set of mag holders I’ve owned! This item could be a 5/5 stars if the company gave you options for sizes on the belt adapter!

I haven’t run them in a match yet, but they appear to be quite sturdy and easy to convert from a double stack to a single stack (to run with my 1911). These are very impressive for the price and I was just practicing dry reloads and was very happy. I would say worth every single penny. They were challenging to get into my belt, so now that they are on, they are staying on. So if you are someone who likes to swap around setups, I wouldn’t recommend these or I would recommend getting a second belt (that’s what I did). I do have two minor complaints, but again for the price, I can live with both of these: 1. I wish these came with instructions of some sort on swapping out the spacers and how many of the rubber washers you should leave in so that it makes your adjustments a little easier (again a very MINOR thing) 2. I wish the panel on the front that allows you to access the screw that adjusts cant of the mag was easier to get off (again, A very minor thing).

Won't fit on my belt. Not the height, it is the thickness. Belt is 1.5 inch. But the screws for the width adjustment to short for any real adjustment. Highly disappointed, and unhappy. Real pain in the rear to adjust. To many tiny screws and nuts falling out. I guess buy this if your that set on getting the perfect angle height and whatever. Just be ready for a real process of you make any change, if it fits to begin with. Update, got it to fit. Very difficult because the screws are attached to nuts. The screws are short enough that you have to press them on to get them to thread doing so one at a time. Be nice if they were long enough you didn't have to take it apart to get it on the belt. Should I decide to adjust location, it's s huge process. Remove pouch side plates (remove two tiny screws and nuts). Unscrew pouch. Set aside. Remove four screws and nuts (tiny). Move to new location, put it all back in reverse order. You would be tempted to leave them in place they are just because if the headache moving them. If the belt mounting screws were longer you could losen, slide, adjust, tighten. They function well once finally mounted, I'll give it that. That's why the 3 Stars. Would I buy them again? I'm buying another belt, I'm going to find another magazine system. I say system because this is a system, not just holders. Instructions not really needed, but would have been convenient. When mounting leave at least one together to make sure you put it together properly. I recommend buy one, if you can put up with the work involved in adjusting, get more. If not look elsewhere.

These great as long as you're using them with the right size belt. After realizing I needed a belt no more than 1.5, I bought the right size of they are perfect. Basically just slides onto the belt with just the right amount of tension to hold firm once the belt is tighten down.

I have purchased six total mag holders. I have a Wolf Tactical belt with quick release buckle. I used these mag holders right out of the box with NO adjustments. I slide them on my belt at each competition along with my holster and have had zero issues. I can move them between my belt loops on my pants and they also adjust/tilt and hold mags with no issues. I have not had a mag pop out or fall out like some reviews. I highly recommend these mag holders. I used them for double stack 9mm. I would challenge any of you poor reviewers to a shooting competition and guarantee I will beat you!

I saw these and thought they would be useable for my backup competition gun. Looked like a great price point. I was very, VERY disappointed. Whoever designed this put no thought into how the end user would need to adjust the magazines. The screws are on the inside for reasons I can't comprehend, and cannot be flipped around, so rather than easily taking the plate off, lining up your belt, then screwing back on, it is impossible without manipulation of the magazine holder itself, WHICH by doing so you loosen the magazine holder so you magazine flops around will no longer stay up right. Fortunately, they have adjust to fix that.... BUT the screw to adjust it is INSIDE the plastic pouch, so you are unable to reach it, to tighten the magazine pouch you just had to loosen to install it on your belt. Seems absurd? Because it is. I'm shocked so many people use these. Get some DAA Racers for slightly more money and save yourself the hassle. Buy once, cry once. Lesson learned.

These work awesome. I’m no competition shooter but I’ve ran my mags through them a ton and they have held up perfectly. They showed up exactly as they were advertised. Fast shipping as well!

They work well with Glock mags

These mag holders are affordable knock-offs of high end, competition-oriented holders which can cost 3x+ more per unit. If you are patient and handy with small tools, they can provide a low cost entry into competitive practical shooting sports. They are highly adjustable to a range of magazines and fit most common belt systems (up to 1 1/2” width). Made of plastic, they will not have the lifespan of high end units made of aluminum etc., but until you get into high frequency, intense practice and competition sessions they do the job. You have to spend time adjusting them to fit your mags, dealing with many tiny nuts and screws as others have mentioned (would be nice if company included some spares as they do tend to go walkabout!). Getting them mounted on your belt is also a bit of a pain; once you get them setup you will want to leave them on. As shown in accompanying pictures, I made a couple of mods which improved holders a bit. As they come, mag retention is by friction alone, which changes with use, temperature, etc. You can tighten the top black knobbed bolt down for secure retention, but then mags may be sticky to pull out. I epoxied 3/4” by 1/8” thick rare earth magnets to the inside center of the outer panel of each holder, so the magnet was centered over the fortuitously positioned hole through the inner panel of each holder (silver disc visible in photo). The resulting clearance is perfect for effective mag retention, without any scraping or interference and allows one to reduce the friction screw pressure, giving a secure but slick action. Note some competitions disallow magnet-only holders; it’s not clear if they would rule this system out, but if that ever was an issue one can quickly undue 2 nuts and remove the outer panels with attached magnets and use friction retention alone. Also as seen in photos, I drilled a tiny pair of holes in lower rear corners of each side of holders, and pushed through a 4-40x1” screw, with a piece of black plastic tubing as a spacer (cut to fit my mag thickness), with a nyloc nut on inner end. This addition made the mag holders much more sturdy and stable. Finally, as others have suggested, once I had all the holders adjusted so mags fit well, and got them mounted on the belt at the correct angles (tilting slightly away from belt, and slightly forward works), I applied blue medium threadlock to every nut and bolt (except top friction knob) and retightened everything carefully. Several friends use these holders as well, without modification, and seem happy. They use the holders with Krydex belts which also seem fine. I had a similar but higher-end Black Scorpion belt, on which these customized holders also work well.

Seems well built. Easy to switch to lefty holds glock and smith&wesson mags supper tight but are easy to pull out and put back so There great for speed loading but these are my first mag holders like this so i have no other brands to compare too. I will repost. If they break

Received this 2 days ago, and they are great. Packaging was great. Only thing that I question is that to adjust the angle and/or tightness of mag holder you need an Allen key which was not included. I didn't take off a star because almost everyone has allen keys. These mag holders are a welcome addition to my range days.