74PCS 1 3/4 1/2 3/8 Inch 3:1 Heat Shrink Tubing Assortment Kit Double-Wall Adhesive Lined Marine Grade Industrial Heat-Shrink Wrap Wire Tubing Black Red

Good variety of sizes in well organized and convenient plastic case. Works well, is a little thicker thickness than other clear heat shrink which may be a plus or a minus depending on your application and preference. Description says it may yellow slightly over time. Have not observed any dis-coloration as have only recently used produce but I amusing it in part as a protective sleeve to help keep Casio Labels around cables/wires for identification so this could be an issue after time. Right now the heat shrink appears crystal clear and the underlying labels are easily read and look very professional and will not peel off like “unprotected” self adhesive labels.

I've been super impressed with this heat shrink. It shrinks up really well, has plenty of adhesive inside to seal and rarely melts through, even when I use a torch to shrink it. It's a decent selection and feels heavy duty. A lot of heat shrink you can feel is just super thin, this stuff is much better. When I run out I'll buy this brand again.

Pleasantly surprised. Went to cover some 4ga battery lugs and the tubes looked way too big. Tested one by putting it on a screwdriver. I didn't expect it to shrink that much, but wanted to see how far it went. It shrunk all the way down and glued to the screwdriver. Very pleased. Good thickness - nice and heavy over the lugs. Another nice feature - they are so big you don't have to remember to put the shrink on before you crimp the connector - plenty big enough to slide on after you crimp. Haven't checked, but I would also like some that are a bit smaller, for smaller gauge wires (18-20ga tefzel, unshielded, for example.)

Great little pack. Ordered two.

The variety of sizes is great! I needed to add new wrap to a battery terminal and found the perfect size piece, put it on and used my heat gun to shrink it. Worked perfectly!

This heat heat shrink tubing works easily.

These worked great for I used them for, which was non-electrical. I made some antenna mast guy "wires" using 3/16" starter rope and wrapped the end around a rope thimble to form a loop. I used this shrink tube to secure the end of the rope. I used a mini heat gun with the high (800 degree) setting, the tubing shrank right down and everything is secure. Did not encounter any of the issues mentioned in other review, it's not thin or fragile stuff, it shrank down without any difficulty. The length of the tubing in this set runs from 1-3/4" to 3", depending on the diameter size. What you see in my pic is a 3" piece cut into two 1-1/2" pieces.

good quality tubing, but it is larger than the package says it is not three-quarter inch. It is slightly over 1 inch.

Super easy to use. I tend to use these clear tubes to cover labels for wires so it’s important that they shrink with low heat and seal really well. They do exactly that. I’d buy them again.

Fidèle à la description !

Quality

tel que décrit

Worked awesome for what I needed.