Transmission Jack Lift 1400lbs (0.63 Ton), 2 Stage Adjustable Telescoping Hydraulic Transmission Jack, High Lift Dual Telescopic Trans Jacks Hoist w/Pedal, 34" to 68" Lifting Range

As a former trans mechanic I think this is an awesome value. I will list the things I did not like, but keep in mind the price.Now with that being said, In my opinion it is nowhere near as good as the ones used by professional that cost $1200 or more. Its not even really close to the quality of a high end professional unit.I put a hoist in my garage and I needed one to take my dads trans out of his 1990 F150 4x4. I decided not to remove the transfer case and pull the whole thing out as one unit. Although this worked (barely), the legs did bend a little.It worked fantastic for removing and reinstalling the gas tanks.The other thing I was not impressed with was there was only a tilting function one way, not both ways which is what I was very used to. It does tilt one way and slides the other way (slides left and right, not tilt) but I was thinking that it "tilted" forward and back, left and right. That is not the case.But with all that being said I still gave it a 5 stars because for $170 it just can't be beat. It is a real life saver and I am very glad I bought it. Because it is such a great value, I gave it a 5 stars.I have had it about 2 months as of this post.

Full disclosure, I restore muscle cars as a hobby as I get older I don't strength to be handling heavy transmissions. I work in a residential home that has a four post lift in the garage so this jack worked perfectly for my needs. It came in one box and all the parts heavily power coated, all hardware is metric, so be prepared during assembly that you will need metric tools including the 14mm allen key for the base leg bolts. There are very basic assembly directions but if your mechanic or mechanically inclined you can figure this out without any issues. It is very steady when fully extending and holding heavy cast iron 4 speed transmission. Easy to rise and lower especially slow lowering positioning control. I feel it is well worth the money!

Iv used this trans jack a few times since I bought it. I used it to hold an engine up and also to pull a transmission. Over all it’s decent for cheap unit. On reviewer I showed that it had rust on the cylinders. I did have that as well. Only it wasn’t rust. It was just dried oil film they use. It cleans right off and looks fine. I left it in the air over night to supporting the engine and the trans. It never leaked down.The only 3 complaints I have about this is, 1. I hate that it doesn’t have a foot pressure release. It makes it a little more difficult to lower because you have to turn a handle. I like to have both hands on what I’m lowering and I have to kinda crouch down some to turn the handle. 2. It only has 1 tilt function. The other one slides front to back. Pretty much useless. 3. The chain that is provided is a pain to use. You have to bolt them together in the middle. I just use a ratchet strap. I can make it tighter and can wrap it around the front and back if need be.

After removing and installing transmissions using a floor jack for decades I purchased a four post lift and then purchased this tool. Its not what I would consider professional grade. For the home hobbyist it works very well and I could install my powergilde transmission in my race car using one hand. I will never use a floor jack again in my lifetime if I can avoid it. Very good investment.

Works good for price. Chains to wrap trans are useless for the most part. Too short.Other than the chains it worked good

Dont be fooled by the negative review this is a great trans jack. I run an automotive shop and have other trans jacks twice the price off this one and for the price this cant be beat will be buying more. Package came in a wood box very well packed. Only complain is the instruction are bad, just a piece of paper and thats it and it doesnt lift as high as i hoped but its nothing really. My other jack that cost $810 each just lifts one inch or so more.Its extremly easy to assemble just look at the photos and thats it. thanks guys for a great product

It might be the best Jack ever, but we’re off to a very bad start! Packaging was totally destroyed when it got here. I don’t blame FedEx. It was poorly packaged.No instructions, just a parts diagram which was shredded. Complicated spring compression process to get it assembled. I have to go find the right size clamp to compress the spring. I’m sure they have a way to do it, but, again, NO INSTRUCTIONS!The one pager says things like: “when lifting load.need word under it.must the safety stand”And “Keep the removal parts to avoid rust.”Come on, Amazon!!

Great product! Lifted the back of my 66 Mustang with ease (just the bare body). Used it to lift my rear end up with ease! Also used it to take down/put up my trans on the 2015 mustang with ease as well!

Gut

Das Gerät hat sich einmal !!! hochpumpen lassen und dann nie wieder. Es ging weder hoch noch runter !Das ist unter aller Kanone...