Dremel Rotary Tool Multi-Vise, 3-in-1 Attachment (2500-01)

Some items are harder to hold and carve then others. I need to use a deadblow hammer and gouges together. In order to do that I purchased this product. It's perfect for my studio and holds my carving item in a secure position without damage to my any spoon or sculpture I am working. It quick to rotate and position, in addition it comes with an attachment to hold my dremel securely in place leaving my hands free to due curve sanding. I love it. Don't know what i did before I made this purchas.

This vise worked perfectly to hold my Dremel and the sharpening tool. It secured my Dremel well to the table due to the excellent design of the clamp. Most clamps have a small metal fixed jaw and it will slide around and reduce the tension that can be applied to secure it. Other clamps will also damage the table top. This table clamp does NOT have that problem. The fixed jaw is big and it is a non skid pad so that the clamping pressure helps to firmly secure it to the table without damaging the table top. You don't need a great deal of clamping pressure to secure the clamp to the table, and still have it moving around, like most "C" clamps. It is a great design. It also comes with a tool that allows the Dremel to be securely attached to the clamp, as well as an additional vise for attaching other items to the clamp. The Dremel itself can be adjusted to slight horizontal angles, if needed, and then tightened down by hand easily so that it will not move. This is an excellent table clamp and vise for working on small to medium items. I used it to mount my Dremel to sharpen blades for a mixer, and, it worked as well as a bench grinder. Great little tool and problem solver. I ordered it for work and my boss was very impressed with my choice and the way the product solved the problem. Highly recommend.

Good quality and adequate for applications.

If youve made it far enough to be reading reviews on this, youre someone that, deep down, KNOWS how great an addition this will be to all of your dremel projects and beyond. So the functionality is obvious, and let me assure you that there wont be any unexpected disappointments in that area. However, the thing i was a little disappointed by was the use of plastic/composite nuts to tighten both the main "ball" that keeps everything in place, the clamp that holds the vise to the workbench, and even the clamp that holds your work. The ring that holds your dremel IS metal, but the nut that holds the dremel onto it isnt. Now, to be fair, i have not had ANY issues with anything stripping or not being able to tighten enough or anything, and the plastic they used DOES seem to be a VERY tough, durable plastic, but with how great this vise is, i would GLADLY have paid a few dollars more to have metal components and be sure that my kid's kids will still be able to use it. Probably to show their robots how things used to be, and make fun of when we used to actually make things ourselves, but still.

Great tool for any hobbyist or craftsman. Sturdy construction and stays where you want it. Very versatile and almost unlimited positions. Quickly adjustable and easy to tighten down in desired position the first try. You can use the vise with or without the stand and the rotary tool attachment holds your Dremel solidly. Wish I got this long ago and now I don't see how I got by without it. I am thinking about getting another so I have one just to hold my Dremel and the other for the vise. I thought this was kind of expensive before I purchased it but now I feel it is worth every penny. If you ever need a third hand or use any kind of bench top vise you will find this tool valuable. Sometimes I wished it were a little bigger but then it might flex or not be as sturdy. The vise opens almost 12" and the clamp on the base will open to almost 3.5", it will not fit on a 2x4 width wise. The jaws are rubber and the end caps are plastic so you can't use it near open flame, ie heavy soldering/sweating, but it is nice for "soft" items you don't want to scratch up or gouge.

I am writing this review to inform those who may want to use the vice as a tool holder with a Dremel Flex Shaft attachment. I will try to explain this as clearly as possible and hopefully the pictures will help. Because of the thickness of the Tool Holder Adapter that comes with the vice, when the the Flex Shaft attachment is threaded onto the nose of the motor the nut bottoms out and the Housing on the Flex Shaft Attachment does not come up tight. If you use the tool this way, when the shaft is manipulated the spinning Cable Adapter will contact the Housing on the Flex Shaft Attachment and make a grinding noise. What is needed is a spacer with the following dimensions: Inside Dia.=0.450, Outside Dia.=0.650, Thisckness=0.080 inches. The spacer is placed inside the plastic nut that attaches the Flex Shaft Attachment to the motor, and up against the metal Housing. This makes up for the space created by the Tool Holder Adapter that comes with the vice and eliminates the play that allows the parts to grind. I really like the features of the vice and this method of holding the tool works great for me. I think it is much better than the tool holder posts that you hang the Dremel motor from. It would be nice if Dremel provided this spacer with the Vice for those who intend to use the vice as a tool holder when using the Flex Shaft Adapter.

My take on the Dremel multi-vise, over all I like it even if it is 80% plastic. For some time now Dremel has been making most of their devices and accessories out of plastic, but their quality in construction has stood strong and durable. Pro's; This vise is no exception, the build and construction is robust it has a very heavy feel and solid stability. Is it intended for big construction jobs or to hold 2x4's, no it is designed for the smaller ones but make no mistake it can handle steel brackets and most objects that will fit in it's jaws. I like the added features, the clamp system can be used separately as a dove tail and with the added attachment it can be used as a work station to hold your Dremel. To give you a better idea this vise offers nice versatility and would be overkill for the small figure painters out there but that's a good thing. Con's; I wish the screw which holds the base to the table was metal or aluminum and there was a little more padding between the base and the table. I also would like to see some place holders for the extra attachments when not in use. I really like this vise and it's versatility. It's worth the price point. Mike R

Is a great product for detail deemed work! So basically you can tighten it in multiple locations to set it at the right angle and spot go roti to work and will grip your work piece, very easy you use, also can switch it to hold your Drexel tool instead, that way you can hold the work piece up to it and it’s firm and won’t bounce on you, very useful tool in my opinion, and have been using it for every project since I got it a few days ago!

Dream cum true for DIY

Good addition to my Dremel collection !!! It’s working fine so far so fingers crossed …

Wonderful product. Does exactly what I purchased it for and so much more. Package was delivered under 24 hours.

Holds things in place for carving

Muy práctico para detalles