Bob Smith Industries BSI-157H Maxi Cure/Insta-Set Combo Pack (3 oz. Combined),Clear

I recently ordered this for the third time in as many years, and they last longer than that because I gave the first one away to a friend who needed it. This is good stuff. It is thick enough that it doesn't run, but thin enough that when you push two pieces together it spreads out and gets in the way. It will adhere and go through the 'grab and hold' we're all familier with, but it takes a moment, so you have a bit of time and leeway to work with it, but still, you have to be sure of yourself and be prepared. It can also serve as a void filler -- the spray-on accelerator gives almost instant hardening (note, it's a fine spray, it reaches beyond your aim, makes things slippery, and smells funny, though it doesn't irritate my eyes. However, it washes off easily with just plain soap and water. Not so the glue if you stick some to your fingers, so be careful, and maybe keep some acetone (fingernail polish remover) around. Anyway, this product has fixed everything from toys to containers to magnets on things to busted ceramic tiles, even a big one 20" square. I'm impressed, enough to buy it every time.

Wish I bought this sooner. I have used this to repair kitchen aid attachments and arts and crafts/3d printing projects. Holds strong and works fast.

Great glue! works as intended. Good price

I used this on had to glue plastic parts and my results were great. After following the directions the plastic pieces I needed to mend together that all other types of super glues, epoxy for plastics, and plastic specialty adhesives didn't work well this product worked great and quickly. After following directions and using this on my project after the glue set up and cured I tried to get the prices I mended together apart and the mended plastic pieces broke in another area not where this glue was used Amazing stuff. I went back and purchased more. Great product Thanks 👍

Works like a charm for all my projects and sticks to anything, can’t give this a 5 star because the insta cure spray bottle didn’t work.

I needed this to complete a bench top trim router table I was making. Several parts required gluing before pre-drilling and finally screwing together. On several of the parts one face was phenolic coated (Melamine) and the other side was baltic birch plywood end grain. I marked up the contact area and scuffed the mating phenolic area with carborundum sanding paper. The glue went on the plywood and the accellerator on the phenolic. I put a quick coat of paste wax on a formica piece I use for gluing just in case of squeeze out. Perfect adhesion. Didn't separate under the pressure of drilling. Nice stuff.

The glue itself is a perfect viscosity and easy to use. The activator works well, but I find the sprayer on the bottle can end up with too much. Leading to the glue curing white.Unscrewing the activator cap and using the dip tube to drop a single bit of activator works well.

I have used this on several 3d prints. You just place the piece and spritz it. Instant bond. I glued my fingers together harder than I ever have in my whole life 5stars.