Water Pump DC 6-12Volt 385 Micro Diaphragm DIY Self-Priming 12v with 2 X 1 Meter Pipe For Mini Pump Spray Motor For Water Dispenser, Multi

Very good mini water pump, wish adapter is provided along as a package

At the very least, provide a proper wire and plug with the product. It would be acceptable to increase the price slightly (although it’s already quite costly) to ensure the product is delivered in good working condition. We are not electricians and shouldn’t be expected to install the wire, switch, and plug ourselves. Additionally, I received only one pipe instead of the two that were promised.When I installed the wire, plug, and switch and turned on the motor, it sparked, and smoke came out. This is unacceptable. Initially, I received a bag instead of the motor, and after returning it, I finally received the motor. However, even that took at least ten days due to the delay in delivery, and the product itself is below par.

The media could not be loaded.

Used two pumps in series to pump water two floors high (27 Feet). It is capable of pumping water from a height of more than 2 m at the inlet and 3 m (Advertised height) at the outlet; also, the length of tubing at the same height can be greater than advertised height. Only, the bends in the tubing have to be minimized, because it can cause loss in water pressure. However, I have not tested it continuously for hours, I only needed to run it for about 10 minutes at a time.

Small

Nice product but look like a used product.

I was searching for a non-submersible pump all over Amazon. Most pumps were submersible. I wanted to keep the pump outside water and do the pumping remotely for another project of mine. This pump serves that purpose perfectly. Good power. No leaking. Exactly what I wanted.A few cons:No voltage/power rating mentioned on the product.A very faint red dot indicated polarity for wiring.Apart from these, the product is excellent. Perfect for tiny projects.

Useful for dozing chemicals in a gravity fed system where there is no back pressure.