5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RB06)

Great set has popped off ball joints from the mount numerous times. Today I even used the big one to press out the ball joint to replace it . Be warned one of the tools has a sharp point to keep the tool from popping off but some bolts are flat and don’t have the dimple to accommodate the point so it digs a hole and in my case deformed the ball joint bolt so it couldn’t be used.

This tool is good quality. We removed lower control arm ball joint with ease. Easy to use, very straightforward. The tool did the job for us. Would highly recommend.

Great price and quality. Works great

I bought this to do a job on a 2012 fusion. All but one of the ball joint separators broke. The only reason the last one probably didn’t break was because it wouldn’t fit on the one that was stuck. Maybe it’s because it was just seriously stuck or a combination of me not using them correctly but they did make the job easier than it would have been without them. I was disappointed and came to Amazon to leave a bad review but seen a guy mention that he contacted them and got another free kit, so I did the same. They sent me a brand new kit without even asking many questions. Took about 2 days from when I emailed them. Customer service was great and that’s why I would recommend them. Maybe not the strongest tools or best quality but they’re cheap and if they break on you you’ll get a free replacement so I think for the $50 it’s worth it.

I bought for restoring my 1967 mustang and they removed all the ball ! Recommend ++

Works well, make the bolt tight an a wack to give the part a shock load to pop off, worked great in places where a hammer )or fear of damage) doesn't fit

Great tool set for my 2002 F250. Only had to use 1 of the 5 tools for the steering ball joints and the Pitman Arm joint. I probably saved hundreds of dollars versus taking it to a shop. Alway keep the nut on but loose when you POP the joints. Amazing how tight the taper fit is. Was able to POP all 4 joints. Quality kit in a nice case.

Tool works - but WARRANTY is bs. I purchased this in November 2022; and have had mostly no issues - appreciated the tool and quality. However - recently working on my 92 Truck - and the Tie Rod End Puller became Damaged - removing a very tight Tie Rod. Rotating pin got bent; ball bearing popped out and lost... So, now very hard to use. The Pitman Arm puller got DESTROYED (by HAND - NO impact tools or wrench) trying to get a Pitman Arm off the gearbox. So, I'm thinking these all have LifeTime warranties - look into it - find out only 1 year. Manual lists replacement parts - but searching the web and the Orion Motor Tech website - no replacement parts. The Pitman arm puller needs a new forcing screw - even though I used large quantities of lube grease; and the body of that tool - needs the threads repaired. Thread repair "kits" are not cheap. So very disappointed. I did a bit more research and found out Pitman Arms can be EXTREMELY difficult to remove; but Tiger makes a heavy duty unit which removed the Pitman Arm in about 10 seconds. Meantime - I now have two tools in a front end service kit which are USELESS. So I am about to make the same purchase (again) - in one of the more expensive brands - with an actual LIFETIME warranty.

السعر مبالغ فيه جدا

Used on front suspension of VW Touareg. Better than expected and removed the ball joints without any risk of damage to the rubber boots

I used the Ball Joint Separator and Puller to replace the steering spindle on my SUV, and it worked flawlessly. The tools are solid, well-built, and made the job much easier than I expected. The different attachments fit perfectly, and the leverage on the pullers is excellent. Saved me a lot of time and frustration. Highly recommend this set for anyone doing suspension or steering work at home.

Las herramientas se ven de gran material y de buena durabilidad, de momento gran producto

Bonne rapport qualité