Techo Touchless Toilet Flush Kit, Adjustable Sensor, 1256315 Adapt k1954, Automatic Toilet Flusher - Easy to Install

This device is a game changer for homes or day programs with autistic persons who are notorious for aggressive flushing. I was replacing broken flush handles multiple times per year on every toilet until I installed these. Keeps water usage down (especially if you are on septic tank) and mine have been working on original batteries for over a year now. The metal clip used to mount the unit can be adjusted up or down to bring the sensor closer to the lid to ensure it picks up the hand wave. I highly recommend this product !

I purchased this for a guest room toilet to remove the need for anyone to touch it to flush. Im a bit OCD with hygiene and with keeping the nice ToTo chrome toilet handle spotless and free of fingerprints. The product arrived quickly and packaged nicely to ensure safe transport. Installation was simple and made even easier by the included QR code that directs you to watch a short youtube install video. I slowed the video down to the slowest speed in order to keep up. Installation took me less than 5 minutes, no exaggeration. As others have mentioned it would be more ideal if the flush length could be extended to 7+ second, ideally up to a maximum of 10 seconds would be ideal. This means that when this device flushes, it can hold the flush valve open for a maximum of 7 seconds. There is a very small phillips screw that sets the length of time to keep the valve open. On my unit, the adjustment screw was covered in glue, a flick with a metal nail file was all that was needed to remove the glue but it should not have been covered. I had to locate a small enough phillips (ideally an electronics repair kit or eyeglass repair kit) that would fit in the tiny adjustment screw. It would be courteous for the manufacturer to have provided one but some people may not need to adjust the flush length at all. Default flush hold is 4-5 seconds long. I increased my unit to the maximum of 7 seconds which is sufficient to flush the toilet properly but ideally 9 seconds would have been better. From the description I was hoping that this unit could flush the toilet automatically when a guest moved away from the toilet or within some time set intervals, just to insure that the toilet is flushed on its own, with or without any usage. This unit does not do that. This unit solely provides a non-touch flush by motion sensor, you must wave your hand over the top of the toilet lid to activate the flush. The product comes with a chrome hand-wave sticker that you can place on top of your toilet to inform guests that they can just wave their hand over the toilet to flush it. The pickup sensitivity on the motion sensor has an adjustment screw, identical to the adjustment screw for the flush length, and is located right next to the flush length adjustment. I did not need to adjust the flush motion sensitivity. I have been using the unit for several months now and it has worked 100% of the time, still operating on the included 4 batteries. The unit makes no noise when activating a flush, if it does make a noise it is inaudible due to the flushing of the toilet. I would definitely recommend this to others.

I love this automated toilet flusher idea. it is easy to set up, works great and is reliable. I have 2 of them, (one in each bathroom), and they work perfectly for about 2-2.5 years. However, after a couple years, something goes wrong with the circuit board and the motor where the rotation of the motor is not perfectly calibrated anymore. In normal usage, when motion is detected, the motor will rotate the motor which pulls the chain up and allows the toilet to flush. This movement is calibrated well, and has consistent movement from the bottom of the rotation to the top of the rotation. However, in both of my bathrooms, after 2 years, it seems that the circuit board is unable to rotate the flush mechanism the same amount both forwards and backwards. So the toilet will flush fine once, but then when it resets, it resets into a differnet location than previous. and by the next time you flush, the rotation doesnt even have enough pull on the chain to make any movement, so nothing happens. If you keep waving your hand over it, eventually it will get to the correct position again where the chain pulls up on the flusher in the right amount, but then it takes a few other attempts to get it to work again. so it seems that the unit slowly loses calibration over the course of about 2 years, flushing an average of 3-4 times a day. just be wary of this. Other than that, this is an awesome device that is cost-effective and works well!

Installed our Kohler Touchless toilet bowls in 2015. Some are used more than others. On any toilets that have daily usage - a handful of flushes per day, batteries need replacing at least every thirty days, and all 'ghost-flush', which is extremely annoying, costly, and potentially dangerous. Needless to say, whenever we vacation or are away from home for more than a day, we remove all battery packs, just in case. When the batteries are super-low, it'll keep flushing, die when in the opened position, and the toilet will continuously run. We always meant to call Kohler, but never bother. I assumed replacing the motor/unit wouldn't help, as we have this problem on ALL of our Kohler Touchless toilets. A few weeks ago, one of the motors burnt out, replacing the batteries didn't help. I didn't bother to call Kohler because I figured I'd receive a replacement quicker when buying outright. With that, I came across Techo Touchless Toilet Flush Kit on Amazon. I initially thought it was a bit expensive, but reviews were great, so I figured it was worth it. Well, it definitely was! Amazing motor replacement, worth every penny. The battery pack is separated from the motor, which is cool. I don't love that I need a screwdriver to replace the batteries, but if it's only every six months, no big deal. You can adjust the motion sensitivity and flush speed. It literally takes sixty seconds to install. Out-of-the-box it would flush over-and-over once the lid was back on the tank. I lowered the motion sensitivity to the lowest, which I think is '0', and that was it, perfect! For reference, I did add the included tank cover spacers/padding. I think the speed is set to the highest by default, which I left alone. Watch it flush with the lid off, you'll notice the difference instantly when compared to the Kohler unit. You'll hear the difference too with the motor. I'm now going to replace the motors in all of our toilets. They will pay for themselves with the savings on batteries alone, not to mention the water that's going down-the-drain.

Second unit bought. First one lasted 2 years. 2nd one I took out of box, didnt work at all and im VERY familiar with setting these up. When they work its great, but now i’ll have to buy a new lid that has a hole to accomodate a normal flusher. Theyve got to build longevity into their quality control.

***UPDATED*** At just over six months I had to install fresh batteries. The unit didn’t stop working, completely but the sensitivity was off and it didn’t flush with every swipe. Simple process-up and running again in a few minutes. So far so good.** I finally replaced the original touchless flush system that came with my Kohler toilet. What a frustrating, poorly designed mess that was. Even with two (2) rounds of updates from Kohler and a total replacement unit - nothing but disappointment. I can't say enough good things about Kohler support - they tried everything - and at no charge - but nothing worked. Ghost flushes in the middle of the night, batteries that drained after 2 weeks - sometimes less - it was bad. I would have added a lever assembly and surrendered the dream of touchless - but my tank did not have an opening for a handle - it was designed to be touchless so I had to find a solution or change out the entire tank. Enter TECHO. After 60-Days in my Kohler toilet - the TECHO has worked flawlessly. No ghost flushes (not a single one) and after 60-days (I know it's still early in the love affair) the batteries are still going strong. The unit has an electronically adjustable sensitivity setting unlike the Kohler that you adjust by physically raising or lowering the unit inside the tank away from the lid. The TECHO battery compartment is incredibly well sealed with a gasket and a screw to keep it snug. Installation is a breeze. If you are replacing a Kohler unit you'll have absolutely no issues. AND - you will appreciate the engineering changes that make this unit a better tool and at a lower cost than the KOHLER. Sensitivity remains CONSTANT - something the Kohler did not. At 5 inches above the tank lid it activates - every time. As the batteries died on the KOHLER unit I often had to tap the top of the lid to get it to trigger. Not very touchless. This TECHO unit works the way the KOHLER should have. If it keeps working like this after a year (or fails miserably) , I'll update this review. A great purchase in my opinion.

Quality product. You can even tell from the packaging. Went in fairly easily. Had to adjust my existing chain which was the hard part. Had to partially remove it to get the leverage to hook the clasp on the chain to the device.

I purchased this unit in the Fall of 2022 after the original Kohler unit failed. It is nearly a direct replacement for Kohler's much more expensive K-1954 touchless toilet flush kit, and with minor modifications to the battery holder, it fits well. It works exactly like to former Kohler unit, and has not exhibited any phantom flushes. It has has worked quite well, but now after about 18 months, it's beginning to use up batteries much faster. I use rechargeable batteries, and am now needing to charge them weekly with no change in frequency of flushing. If you purchase this unit, I recommend purchasing rechargeable batteries to go along with it. The two purchases combined are still less than half the price of the original Kohler product. Update 10/25/24: I’ve owned this now for nearly 2 years and it has worked perfectly, but noticed that battery life was shortening. Last week it stopped working completely. I was ready to buy another one, but then realized that the contacts inside of the battery case had developed a film that needed to be cleaned off. Once cleaned, the device began working perfectly again. Really happy with it, and I recommend cleaning the battery contacts every so often.

Funciona muy bien. Lo he instalado para una persona que tiene una discapacidad en los brazos y no puede tirar de la cadena tradicional. Es un gran invento y muy útil para las personas con discapacidades. Además, es muy higiénico Iba a comprar otro pero me he encontrado con la sorpresa de que lo han subido el triple.producto en este momento. Por favor, póngalo de nuevo a la venta para comprarlo de nuevo. 100 × 100 recomen a dormir como cambiar vale a dormir la opinión dable

Nice compact and clever device, fully recommend for elderly and anyone that may find flushing a toilet not so easy, as this makes it no effort. Easy to install, Easy to adjust to suit different install applications.

I purchased this Kohler toilet from Home Depot about 8 years ago and really liked the touchless flush. We only had to change the batteries about once a year until they started dying within a week, even though the toilet wasn’t being used much. Kohler wasn’t helpful and just said this toilet had been discontinued and there was no fix for the flusher. I was happy to find this flush kit and not have to replace the whole toilet. I installed it a few days ago and it went together well. It is very similar to the kit I took out and has been working well so far.

Excelente producto y excelente mi vendedor. Esta vez llego rápidamente y su funcionamiento es optimo

Recomiendo que se tomen un tiempo a medir el espacio que tienen para que no les pase lo mismo que a mi. Sin remordimiento lo regresó porque no tenía apariencia de ser nuevo.