--- product_id: 27603980 title: "Inline air gap with 1/4-inch FIP or 1/2-inch Thread Inlet and 5/8-inch Compression Fitting or 3/4-inch Thread Outlet. (AG150-001, 211211, GAP-A-FLO)" brand: "air gap international" price: "B/.120" currency: PAB in_stock: true reviews_count: 5 url: https://www.desertcart.com.pa/products/27603980-inline-air-gap-with-1-4-inch-fip-or-1 store_origin: PA region: Panama --- # Inline air gap with 1/4-inch FIP or 1/2-inch Thread Inlet and 5/8-inch Compression Fitting or 3/4-inch Thread Outlet. (AG150-001, 211211, GAP-A-FLO) **Brand:** air gap international **Price:** B/.120 **Availability:** ✅ In Stock ## Quick Answers - **What is this?** Inline air gap with 1/4-inch FIP or 1/2-inch Thread Inlet and 5/8-inch Compression Fitting or 3/4-inch Thread Outlet. (AG150-001, 211211, GAP-A-FLO) by air gap international - **How much does it cost?** B/.120 with free shipping - **Is it available?** Yes, in stock and ready to ship - **Where can I buy it?** [www.desertcart.com.pa](https://www.desertcart.com.pa/products/27603980-inline-air-gap-with-1-4-inch-fip-or-1) ## Best For - air gap international enthusiasts ## Why This Product - Trusted air gap international brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Inline air gap with 1/4-inch FIP or 1/2-inch Thread Inlet and 5/8-inch Compression Fitting or 3/4-inch Thread Outlet. (AG150-001, 211211, GAP-A-FLO) ## Features - ❤ EASY TO CONNECT: Gap-A-Flo air gap (AG150-001) has a 1/4-inch FIP or 1/2-inch MIP threaded inlet and 5/8-inch compression fitting OD outlet with 3/4-inch thread outlet connection. The inlet accommodates 1/4-inch FIP or 1/2-inch threaded PVC adapters, while the outlet can accommodate 3/8-inch FIP, 3/4-inch threaded PVC adapters, or 5/8 OD tubing. The convenient design of the AG150-001 allows it to be tilted at any angle down as low as 45 degrees. - ❤ STANDPIPE CONNECTION: Gap-A-Flo air gap (AG150-001) is a gravity flow device and must have an outlet poly tubing feeding directly to a drain without kinks or bends. It can be oriented in any way between 45 degrees and vertical with inlet port elevated above the outlet port. To ensure easy wall mounting, a Jiffy Clip clamp is included with the air gap. The air gap outlet is tested at 15 gallons per minute, and recommended use is 7 gallons per minute. - ❤ SPLASH PROTECTION: The AG150-001 air gap uses rotating splash guards to assure a completely dry operation. Splash guards are an integral part of the design and can be seen through the side air gap window. During water softener operation, an initial discharge surge can create splashing. Splash shield eliminates the possibility of water splashing outside of the air gap. When designing drainage for an air gap, makes sure that P-trap is located minimum 20-inches from the top of the standpipe. - ❤ QUIET OPERATION: When water exits the air gap, depending on the design, it may flow directly into a P-trap. This can create splashing noise that may be objectionable. To avoid excessive noise, it is recommended to use 22 degrees elbow in line with standpipe to avoid direct drainage to P-trap. The pipe elbow should be located at least 12 inches from the air gap to eliminate splashback. - ❤ CERTIFICATION: The AG150-001 is UPC (Uniform Plumbing Code) Listed, IPC (International Plumbing Code) and NSF (National Sanitation Foundation) tested. The testing is conducted for every manufactured lot to ensure consistent performance. ## Images ![Inline air gap with 1/4-inch FIP or 1/2-inch Thread Inlet and 5/8-inch Compression Fitting or 3/4-inch Thread Outlet. (AG150-001, 211211, GAP-A-FLO) - Image 1](https://m.media-amazon.com/images/I/612105vubBL.jpg) ## Customer Reviews ### ⭐⭐⭐ Expensive *by A***R on Reviewed in the United States on September 29, 2022* Expensive ### ⭐⭐⭐⭐⭐ Works fine for my water softener drain *by J***M on Reviewed in the United States on June 1, 2021* The softener drain needs to have an air gap if discharging into a sewer line or floor drain. Since my water softener's maximum drain rate is only 2.2 GPM, this air gap worked fine with a T into the humidifier's 3/4" drain line which went to a floor drain. Because of the location of the floor drain, I decided to use an inline gap instead of just holding the drain line away from the floor. Note to be careful (I should have known better) if using a wrench on the bottom of the unit to tighten a connection on the top. I got an internal crack that initially was fine when I tested the softener discharge but then leaked when the softener recycled during the night. ### ⭐⭐⭐⭐⭐ Great product! AND *by A***R on Reviewed in the United States on January 9, 2017* Great product! AND....great support. I had a difficult routing of the drain and they engineered me out of a bind. Good company! --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.com.pa/products/27603980-inline-air-gap-with-1-4-inch-fip-or-1](https://www.desertcart.com.pa/products/27603980-inline-air-gap-with-1-4-inch-fip-or-1) --- *Product available on Desertcart Panama* *Store origin: PA* *Last updated: 2026-09-30*