SSK Aluminum 2.5" Hard Drive Enclosure USB C 3.1 Gen 2(6Gbps) to SATA External HDD Case Adapter for 2.5 inch 7 9.5mm SATA III HDD SSD with UASP Compatible with WD Seagate PS4 Xbox

This drive enclosure is exactly what it says it is, which is great! It is inexpensive, light weight, small, and an aluminum shell, with a reasonably performant chipset and USB-C interface. It is USB bus powered and comes with a USB A to USB C cable, so everything is open to use it easily. No issues have shown themselves after several hundred gigs of transfers. Installation is quick and painless with the included tiny screw driver and screws, and it doesn't feel like things are going anywhere. The fit was great with an old half tb WD SSD, but probably wouldn't suggest a spinning HD with it as there isn't great dampening nor thermal transfer since you have to slide it against the aluminum rather than place the aluminum over the top of it and there is no airflow possibility. Perfect for SSDs though.

Works great, my ssd fit perfectly, and I really like the all aluminum shell. The issue other reviewers mentioned about the cable not seating all the way in may have been fixed since mine appears to be flush, or at least does not stick out far at all. Speed seems to be appropriate for my basic ssd.

Why did you pick this product vs others?: I picked this due to the sleek and solid frame. This is being exposed to the user, and ads a little class to the ordinary plastic everything else is made out of. The external is SATA3, true to USB 3 transfers from the disk. The plastic tray leaves a little to be desired, however, if you ham fist computer parts, you probably should go work on a dozer. It will get warm. Not hot. I have measure 92-95F. Super inexpensive for an enclosure that looks good sitting, transferring data, like it should. I would not use this as a travel buddy. I have other, more robust/insulated devices for that.

The enclosure is a good metal housing with a plastic sleigh that holds the drive and the circuit board. The package comes with the enclosure, manual, 6 hard drive screws, a plastic sticker to put on the bottom of the hard drive to prevent scratching, and a USB 3 type A to C cable. The USB controller is a JMS576 by JMicron. This controller is a USB 3.1 Gen 1 (Which is the same thing as USB 3.0 but I digress) to SATA 3 (6 Gb/s) controller. The build quality is very good for the price with one issue being the possibility of slight warping due to the shell being metal. The USB-C port isn't as deep as other ports, so some of the connector is still exposed, but it isn't that big of a deal for the foreseeable future. I cannot test the performance of the enclosure/adapter since I do not have an SSD to test with. Overall, it's a good enclosure if you have some old hard drives lying around, but I can't recommend it for faster drives and applications until I or someone else tests the performance of the adapter.

Works perfect, sturdy construction, and looks great. Don't waste your time on the inferior plastic products out there.

I love this enclosure, especially that I compare with what I got before from other brand. Good and solid. No lock-click bending plastic - just normal screws making it stable, not flip-flopping inside. Screws are of appropriate size, not tiny/miniature. The cable is of usable length. Easy to assemble and feels solid. I used it for backup cloning of a drive. I am very much satisfied with the performance and the construction. Great product.

So far it does what I want...read DVD and BluRay discs. I was able to also write a DVD., and it appeared to be able to write a BluRay but I did not have a double-side BR disc to write to. I was skeptical regarding the price but happy so far. Previously I had purchased an expensive BR/DVD external drive that cost over 3-times this one. That one had repeated read errors on my discs whether DVD or BluRay. I returned that one and bought this one. My only small issue is at times when you close the disc drawer it pops open and requires another try. When operating I consider the its noise level to be normal for these devices compared to those I have had..

What I like: Type-C, Heat Dissipating Aluminum Case, Ease of installation, USB 3.0 Speeds What I REALLY dislike: The flimsy bendy plastic that holds the 2.5 Drive and the Type-C Port.... I dont think this will last long tbh, whenever I plug in the cable i can see the port sort of bend in and I do not like it. Idk why they made the part that holds everything together out of such a flimsy material, its like making a chair with a solid metal seat but the legs out of rubber. I just hope it lasts. But other than that, the price is decent, and it makes my 2.5 Drive Plug and Play, so its functional.

Inga problem med att installera en 500GB Samsung SSD, fungerar utmärkt.

Slim and nice looking enclosure for 2.5” SSD or HDD. Easy to install the drive, works perfectly.

بصراحة طلع احسن مما توقعت..الف مليون شكر للبائع الامين وشكرا أمازون ...

Ce boîtier contient parfaitement un disque récupérer sur un ancien laptop. Design simple élégant, conception solide. Fonctionne parfaitement.

Tolles Aluminiumgehäuse mit sehr hochwertiger Verarbeitung. Das Gehäuse wirkt robust und äußerst stabil, es treten keinerlei unerwünschte Bewegungen oder Geräusche auf. Die SSD wird mit zwei Schrauben sicher im Rahmen fixiert und anschließend zusätzlich mit zwei Schrauben im Gehäuse befestigt. Das Gesamtgewicht beträgt 124 g in Kombination mit einer SD Ultra 3D 2 TB SSD. Während der aktuelle Trend zu schraubenlosen Gehäusen wie dem UGREEN Festplattengehäuse 2,5 Zoll USB C 3.2 Gen 2 auf SATA geht, fällt die Wahl hier ganz klar auf das SSK Aluminium 2,5 Zoll. Verarbeitung, Haptik und Befestigungslösung überzeugen vollständig. Ergänzende Details sind auf den Fotos ersichtlich.