KETOTEK Digital Thermometer Temperature Meter Gauge Waterproof Sensor Probe Aquarium Car PC case Incubator Temp Meter 4 Pin Power Supply Celsius/Fahrenheit LCD Display

Nice thermometer with a scale and digital read out for monitoring temperature. Bright display, easy to see read-out, good value for the money.

This KEOTEK Digital thermometer was soft and on the eyes to look at day and night.. An excellent item for use on a car dashboard to monitor engine temperature. If the sensor lead is too short, ordinary speaker wire can be used to lengthen it. The sensor lead is just regular, very thin, about 22 gauge wire. I would suggest cutting the sensor lead a few inches outside of the sensor housing to lengthen the lead. The sensor is soldered on two tiny tabs on the PC board and the new lead can be soldered ther in place of the original. I did that but If a person is not skilled enough to do that then just add on to the existing wire externally. Saves time prying open the device housing and tearing two small wires from the backlite main LED. Accuracy is excellent. If a person needs beater accuracy then he'll have to pay more for a lab grade temp measuring devices. All in all the KEOTEK A great little device and sold and a lot of value for an excellent temp gauge sold at low price .

I put this on my pwm controller for my trolling motor to monitor the temperature of the board. I checked it with other temp probes and it's very accurate. Very nice and crisp display. I have two issues with it, that are small. Not water resistant and the screen is small and I struggle to see the numbers from 4 feet away. Other than that, useful and accurate

I use this in my PC case and the sensor hanging right next to the CPU and GPU. Used it in two different cases now and works nicely to tell you the temperature inside the case with a bright easy to read screen. Van change between C and F readout.

I wanted to be able to see the temperature in the output side of our HVAC air handler. I connected this to an AC 24v->DC 12v converter and then powered the converter from the 24v "fan" line of the HVAC blower. Since the device uses less than half a watt, it doesn't create any additional load issues for the HVAC transformer when it's running. This turns on the temperature display only when the HVAC is running in either heat or cool mode , and the sensor appears to accurately pick up the air temperature in the output side plenum. I simply poked a small hole in the side of the foam-board plenum above the air handler and inserted the probe, then caulked the opening. When I compared this sensor to another temperature gauge, it was within 1 degree F, so I consider it to be working properly. I've actually ordered a second one to insert in the supply side plenum so I can easily measure the temperature delta for the system at any time, whether it's in heat mode or cool mode.

Doesn’t fit standard switch hole sizes either blight style or Chinese equipment.

I’m a gamer. I bought two of these temperature monitors. One is shoved in the fins of my RTX-5090 and the other is on the base of the CPU heatsink of the Ryzen 9950X. Sure there are temperature measurements available in various software for each. I prefer having an unbiased direct measurement for a few dollars for safety. The ease of powering them with disk drive power connectors that are spare anyway makes it so easy. Easy, heap, and fun to view.

Simple, cheap. Seems reasonably accurate. There's a jumper at the back you pull off to switch the temperature scale to Fahrenheit. It's really bright so you might want a plan for covering it up. Molex wires are colored - yech - but those usually get covered up anyway. Thermistor wire is long. Nice little gadget.

Imballo ok,display pensavo più evidente,ma si legge facendo bene ATTENZIONE se si cerca il particolare Nel complesso ok

Scarsa qualità