Single-Stick 2 oz | Pool & Spa Repair | Easy for Anyone to DIY | Works Underwater or Above | Fix Cracks Leaks in Concrete, Fiberglass & Other Surfaces | by Atlas Minerals

Very nice product. I used it to repair cracks in a pool skimmer which I believe is ABS plastic. Way better than the JB Weld product that failed after about a year. Very easy to mix and apply. Sticks better than the JB weld, and the finish is a lot nicer. Worth the wait and extra cost. I recommend.

This stuff is a life saver! We got a pin size hole in our above ground pool and this worked perfectly. Just use gloves mix a little of the 2 and it was super easy to apply inside the pool filled with water and outside for good measure. Definitely something to keep around for pool season just in case! No more leaks!

For a pool owner, this would get a Product of the DECADE recommendation! Without going into too much detail, let's just say this stuff solved/plugged a skimmer leak that I was told would require major excavation/intervention to correct. I made the mistake of believing the product would work better if the surface being repaired was totally drained/dried out for a couple days. FALSE! I did rough the surface up quite a bit with Scotchbrite & cleaned it with brake cleaner but when I went to use this product mixed per the directions, I was a bit disappointed in how it was setting up/taking shape UNTIL I accidentally got a little water onto the area I was trying to repair. Instantly it started becoming malleable, turning into a proper paste, adhering to the surface & behaving as I would expect it to. A month later, pool still holding water perfectly & I only used about an inch worth of product. I still have LOTS more for any other leaks/future problems. The repaired area has since set up & feels like concrete. More importantly, my pool hasn't retained water like this since I put it in. Bottom line, this stuff works WONDERS. Just make sure you're not afraid to get it wet because that's exactly what it needs to work properly. Just don't be a dummy like me & overthink the chemists who designed it.

Easy to use and works underwater

The best pool putty on the market. Recently tried a different product and regretted it immediately.

Pros: - Works well for sealing pool leaks, even underwater. - Fast drying time. - Durable repair that lasts a long time. - Dries white, making it relatively discreet once applied. - Good DIY solution that can save money on repairs. Cons: - Can be messy during preparation and application. - Requires gloves and careful handling. Overall, this epoxy pool putty is a very effective DIY solution for fixing leaks without professional help. It performs well even underwater and sets fairly quickly with long-lasting results. The only downside is that it can be messy to work with, so proper preparation and gloves are recommended.

Applied it underwater and it’s just constantly falling apart still. Days later it’s flaking apart quickly. Worked better above water.

I had a leak along the seam between the skimmer housing and the pool stucco. I mixed the product and applied it to the seam with a little bit of water as the skimmer housing was lower than the stucco so it was applied wet. It dried in thirty minutes and I tested with the leak detector and found a tiny leak in the corner and applied some more compound. Tested again thirty minutes later and no more leak. Worked perfectly.

Todo llego ok. Muy buen producto.

Worked great for sealing my pool light cable. Sets fast

Buen producto

Make sure to use cloves

Worked perfectly for intex big swimming pool. All benefits as described.