Mounting Dream TV Mount Fixed for 32-55 Inch LED, LCD and Plasma TV, TV Wall Mount Bracket up to VESA 400x400mm and 100 LBS Loading Capacity, Low Profile and Space Saving MD2361-K

sed this Mounting Dream wall mount to hang a TV in my garage, and it worked great. The mount feels really solid and held my 55” TV with no problem. It sits nice and close to the wall, which gives it a clean, low-profile look. Installation was simple with the included hardware and instructions, and the built-in level helped a lot. Just make sure to mount it into the studs or concrete as recommended. Great quality and value for the price—highly recommend for anyone looking for a strong, no-fuss TV mount!

So when you spend this little on a product your expectations are not the highest. I knew my TV had a 400x400 mount and that it would fit but that this was also the max. So I got out my stud finder, picked the studs I was going to used and got to work. First off, the instructions were decent. I mean, it is pretty obvious, drill 4 pilot holes and lag em in but it is nice that if someone has no skills they can use this. It also tells you everything down to the screw size. It came with a very small level but I used my own for marking the studs which I recommend as the one they included was tiny. I really like how the rails clip on to the mount and are quite secure. I honestly feel like I could hang off of this thing which is good because my 50 inch plasma is heavy. Now the cons. Even with the spacers, this thing is pretty close to the wall. If you have side ports on your TV or a recessed cable area you are OK. When I have the VGA port from my computer in it wont lock into the mount on one of the rails. You could cut a small hole in the wall but just keep in mind if your cables stick out far it's going to be tough. You also have to remove the TV from the mount every time you change a cable, so get it ready with the cables in the back BEFORE you mount it to the wall. I put an extra HDMI cable in there and cable tied it in an area I can pull it down when I need it to not have to remove it later. (it is pretty easy to remove, pull the straps and lift. Over all I give it 5 stars. You cant beat the price and it is secure. Just make sure you are aware how close to the wall it is. You could make your own spacer and go to a hardware store and get 4 longer machine screws for your TV if you were so inclined. A 1/2 inch would make a big difference for your cables.

Excelente base de apoio para a TV !

Pros: - Nice and tight to the wall, but enough room to stick a Raspberry Pi back there - The 'locks' are nice; it will only come off if you pull down the two straps - Wide enough to easily span across two studs - TV mounts are narrower than the wall bracket, so you can slide the TV left and right to align it exactly where you want after installation - Packaging was very light and minimal - Clear instructions; included more than enough extra fasteners and spacers (it fit a heavier 10-year old Sony TV like a charm) - Awesome price Cons: - No tilting, but that's pretty clear in the description (and price point)

La instalada fue fácil (pero ya tengo práctica haciendo hoyos en la pared 😁). La television es fácil de quitar y volver a poner con este soporte, con cinchos acomode los cables en los herrajes que van en la television la television luce bien y se ahorra mucho espacio al estar empotrada. Me apoye de un nivel de burbuja más grande, ya que el que trae es pequeño