MIS01 Recording Microphone Isolation Shield, 3 Panels Soundproof Foam | High Density Pop Filter,Top Enclosed Foldable Soundproof Cover for Condenser Mic Home Studio Equipment,Podcast Recording

Most definitely a 10! I didn’t realize how bad I needed this until I got. Transformed my sound from amateur to professional. It doesn’t block sound completely but my studio is particularly treated. I mainly record with my U-67 which is a tube mic. If you about tube mics then you know how sensitive they are. But this sound shield is perfect. GET IT!!!!!!

I record from home in the heart of Hollywood, so I needed something that wouldn't take up a ton of space but would protect my recordings from the outside noise of traffic, yelling, etc. This little dude is perfect. It secure right onto my mic stand and fits my Mic perfectly. You can adjust the wings around it for a better noise-proof seal, and the quality really comes close to a professional recording space. If you're looking for a sound shield thats easy to assemble, lightweight, but powerful in it's design, then look no further!

As in the title, great product. Feels sturdy and seems to help with room noise a bit, although I had hoped for a liiittle better result. Im using an mxl 990 cheapo condenser that is very "noisy" and I was hoping this would quell the problem. Definitely helped, but the blame is on the mic. That being said.. Satan himself designed the assembly. Placing nuts in small crevices you cant see or reach, held in place by nothing while putting the screw in, just kinda floating around hoping you hit the threads. When you adjust it it makes a loud plastic *SNAP* sound that made me think I broke it. I was a Lego fiend who graduated to IKEA furniture and kept climbing that mountain. I love putting stuff together. Idk why, but i do. I did not enjoy this one bit. Show me someone who put this together in under 24 hours without the use of profanity, and I will show you a LIAR! In all seriousness, it was pretty difficult to put together. Had I assembled these before, im sure I could've gotten it done in a reasonable amount of time, but snapping 5 pieces of plastic together took me over an hour. Thought I could tackle it on my lunch break, but nooooooohohoho. Lotta dropping nuts, lotta swearing, lotta looking up at the sky asking deep questions - most of which starting with the word, "Why?" Ultimately, im glad I got it, you should too, but you have been warned that it's a pain to put together if you have never done one before. There is absolutely NO reason that this had to be designed this way for assembly and I have NO idea who thought it was a good idea to make the customer struggle so. For real... I can't wrap my mind around who and why it was designed this way for assembly. BUT it's assembled and has been tested successfully. I am not remorseful of my purchase. I would estimate it blocked out about 30% of the room noise for my noisy mic. Good luck, and have fun!

Being a singer / musician this mic isolation wrap is perfect. It has helped a lot with avoiding outside ambient noises. Stability is perfect. Installation is a bit tricky, but is perfect for hiding hardware. This is a money saver for sure.

Great item, but for the price it keeps breaking. The plastic hinges are too fragile and every time you fold the panel panels and brakes. I had to replace mine not once or twice. As long as you manipulate the panels extremely slowly and delicately it’s a wonderful item and comes in very handy. I would recommend it, but be careful on how you handle. It be very gentle.

Works perfect for my audio. It blocks out the traffic sound from the interstate!!!

This thing really helps keep unwanted sounds out of your microphone and it's good quality and easy to build. This one is very awesome the the better version since the top also has lips which prevent audio from coming through the top. With the purchase of a adaptor I was able to put my Yeti Blue Microphone on it

Works good to quieten room reverb reflections. As soon as I install I notice my mic had a lower volume , sounded darker( not bassier) , and less brittle. This let me know it is working. I posted a picture so others would understand where to put the nuts for the bolt during installation. You drop it in the slot and it holds the nut for you. I had seen other reviewers who said the bolts were to short. They are not to short it was user error. Overall happy with this purchase. This unit will not completely stop noise but it does block reflections and that's what I needed

Bringt kaum was, Schall wird kaum isoliert.

Ottimo rapporto qualità-prezzo, facile da montare (10-15 min)

I used this in combination with my Rode NT1 and for a mic that picks up loads of room noise like the NT1 and TLM2, this isn't a bad product to have if you can't put foam on your walls or can't soundproof your room. My biggest gripe with this thing is that it's a bit heavy. While decent for desk use, trying to use it on a mic stand has been pointless in my experience. And it's not small either, you'll need an adequate amount of desk space to use it and it can be obstructive. Overall, while this product isn't bad, this and others doing the same thing are pretty situational. If you're considering this, I'd honestly recommend you either get something cheaper or outright just use a mic with better noise rejection.

Excelente producto y calidad del material 👌 Totalmente recomendable 👍

I like the design of this product and functionally it does what it's meant to do. For anyone else reading I'll address some misconceptions from the reviews already submitted. This is not a "vocal booth" and is not designed to soundproof anything or stop the neighbours hearing you sing - it's sole purpose is to minimize reverberation coming back into the a mic. The mic will still pick up loud enough extraneous noise, but it does take away most reflections that mess up a vocal recording. As regards build quality, yes its made of plastic but at this price point for a home studio application it's not an issue, the plastic is about 4mm thick. The design is very good and the mic stand contact point is sturdy. In fact this unit replaces a metal one I had which after a couple of years use broke at a weld point. A note for the product designers: I would have liked a shorter supporting stem so a mic cradle can sit lower down or a fixing that goes directly into the bracket. Also, a "top hat" to eliminate ceiling reflections would be good (I took the foam out of my broken shield and put it on top which made a slight difference.