Whole Tactile Clicky Kit for PS4 Controller Shoulder Face Dpad Buttons, Custom Flashshot Button Stop Flex Cable, Mouse Click Kit for PS4 Controller CUH-ZCT2 JDM-040/050/055

I bought a BRAND new controller to mod. It’s a CUH-ZCT2U. I had no issues with installation whatsoever! I play at a very competitive level in COD and play double claw grip. I am impressed with the result. My advice for installation would be to just be super careful and follow the instruction video exactly as shown (QR code in the box and also found on their website). I did NOT have to sand anything down or “lightly modify” like others have mentioned. Value for the money is an understatement.

- All the pieces you need are in the box with spares. - The step-by-step instructions on the website are excellent. This kit is great for refurbishing old controllers. It just works and the buttons and triggers feel much better than the originals that Sony provides. In my case, I'm playing competitive fighting games so I need triggers that feel less like triggers and more like buttons. This kit enables that. One reviewer noted that the sound of left/right triggers and left/right shoulder buttons was different for him. This can be very annoying! But it isn't exactly true: In the box, there are transparent trigger buttons in 2 pairs. Visual inspection doesn't reveal any difference to me but I'm half-blind and yet still I could swear that they sound and feel different. What you want to do is test them and pair them appropriately, that is, put in the transparent buttons and test them for sound and feel before you reassemble your controller. It took just one test to get left and right triggers and shoulder buttons sounding alike. I hit a small snag when attaching a trigger: I fumbled, slipped, and the blue buttons attached to the trigger microswitch flew out. It's a tiny piece that's easy to reinsert if you have tweezers, but even easier to lose. There are no spares in the box for these blue switches. After this happened it took a bit of fiddling to get the trigger to feel and sound right. This is probably a skill issue on my part. If you're new to modding, just be extremely careful so that you don't accidentally loosen parts that are easy to damage or lose. This is a great product. Thank you eXtremeRate!

Very easy to install IF YOU FOLLOW THE DIRECTIONS! I watched the YouTube video and followed the directions exactly. Everything worked perfectly. All of the triggers have the same tactile feel. Just be aware that the triggers (R2 & L2) will not work the same for racing games since they will be full throttle when activated. If you have "attention to detail" the install wont be a problem.

The installation was fairly easy, but requires a bit of finesse and at least 20 minutes of your time. The plastic piece that is placed inside the triggers is not a perfect fit for the V2, so for most users it is best to carve down the indented end of the pieces by a hair using an exacto knife. The buttons are a little difficult to mash for me, and they wobble around pretty noticeably and I wish they had more give when pressing. You will definitely notice the gap in quality compared to pro controllers with mouse clicks built in, but overall I am happy with the results here. It gives a standard dualshock a personal touch without having to shell out $150-$200 for a pro controller that will break inside of a year. I am thankful to have clicky, satisfying buttons on one of the more reliable controllers of the last decade. I’d recommend this over razer or nacon when it comes to playstation 4, specifically.

These seem like a great idea but honestly the button quality is not great and installation is a nightmare. The plastic for slotting in triggers is slightly too thick. When you reinstall your trigger it will always pressed. I ended up taking a dremmel to carve out the plastic just a hair and now they work perfect. The switches are good but not nearly as durable as they need to be. 1 week of silk song and my x button has lost most of its height and sometimes will either “false press” or not register as if the pad has just failed underneath the rubber top of the switch. I don’t know how much longer the other ones will last at this rate. The only thing I can say is for light use this mod is great but if you “play” games this will not last and I recommend learning how to solder to replace the switches for the shape buttons with something more durable. It’s great but I wish it had more durable switches and recession in the plastic forms for triggers.

Works amazing, if you play Fortnite listen up so when you click into your build it works nice but when you click out of your build you have to actually click the button and not fat finger it, personally I don’t mind having to click it more then smash it but I read a comment when I ordered mine and some guy was complaining about it, I think the product deserves a 8/10 cause sometime it acts a little buggy like it doesn’t shoot but chances are it’s how I installed it, I also just bout the dawn 2.0 and I’m gonna to install that today on top of this add so now I’ll have a full on scuff basically, I’m sure it’s going to be hard to do all of this especially since they’re no YouTube videos on it but I’m going for it, wish me luck extremerate cause you guys really have to make a video on paddles with the clicky buttons cause I’m not the only one trying to figure this out

I had high hopes for the Clicky Kit by eXtremeRate, but my experience was nothing short of a nightmare. Firstly the installation process for the Clicky Kit was simple; the product itself was completely faulty. The parts didn’t work as they should, and after installation, the buttons wouldn’t click properly. Even worse, the kit required me to clip the trigger, which ended up permanently damaging my controller. This wasn’t due to user error it was because of the poor design and low-quality materials of the kit. Instead of enhancing my gaming experience, this product ruined my controller and left me frustrated. I cannot recommend this kit to anyone. If you care about your controller, avoid this product at all costs.

other than trigger plastic (clear one it comes with) needing sanding to fit right its really easy to install and its a must have if you plan on modding a ps4 controller

I only wanted clicky face buttons and wanted to keep the triggers as analog inputs. There's no clicky face button kit but it's easy to modify this one. I snipped off the shoulder and trigger buttons, see the pictures. The traces are isolated so it won't affect the rest of the buttons. I installed it on top of the original conductive film and it works perfectly!

Come sempre è un prodotto che non mi delude mai e se facilissimo montarlo con un supporto anche video se dovesse servire consigliatissimi

I cannot fault this product. I will be a returning customer.

اشتريته وطلع مايركب على يد سوني ٤

update: extremerate provided a solution i was satisfied with. I give the kit 4 stars because in the end I did end up taking it out because i prefer the membrane feeling over the kit my kit did not include the 8 circular shaped rubber buttons that go in the bottom of the face buttons, pictured on the parts overview on the bottom right It instead came with 4 totally different looking rubber pieces that do not fit. Because of these missing key pieces my face buttons are dull (i also tried using the rectangular shaped ones but they keep moving and getting pushed all the way in) so i cant finish the installation contacted extremerate and waiting for a solution or return