Mercer Culinary Knife Guard,Black 12.5 x 2.5 Inch

(Full Review) I love these Knife Guards by Mercer. I own a selection of sizes to fit all the extra knives I have that aren't part of the set in the block I recently bought. Certain knives didn't come with the set and I didn't want to make do so opted to keep some seperates. When buying a Tomato knife which I'd always been lacking and knowing how sharp they can be I didn't fancy leaving it unguarded in the cutlery drawer and risk cuts, so I thought that was the perfect time to buy knife guards. I looked at several different makes which were quite expensive for what they were where you're paying for the name rather than how beneficial they are before I came across these. They are inexpensive and basic looking yet still very good at what they do. I bought a selection of sizes to cover all loose knives of all random makes and types and found they fit all of them really well. After reading what afew other reviewers (UK and abroad) have written afew people seem confused how best to use/operate them correctly and in their words are either risking cuts or damaged knives, neither of which anyone wants!! So that spurred me on to write my own review to hopefully assist in the correct safe way to use and make use of these Knife Guards. So firstly, if you happen to buy one that is slightly smaller or larger than the blade then it's actually ok. To be safe you need to ensure the point of the blade is contained within the guard and not worry if 1 or 2 inches max closest to the handle is showing outside the Guard as you are much less likely to injure yourself in this case whereas the point can do instant damage as I'm sure we've all been unfortunate to feel at one point or another (sorry for the pun). It's also perfectly safe for the top blunt edge to be outside if the Guard is narrower (slimmer) that the blade. Note this is called a Guard not a Sheath. So when it comes to adding or removing your knife to the Guard you Won't be Sliding it. In fact you won't be able to as these are designed to grip the blade. Mercer recommend (but I'm going to go into much more detail to fully explain their basic guidelines to be sure of no confusion): •Adding the Knife to the Guard - Hold the Guard in one hand resting the outer edge in your palm and gripping the two sides with fingers and thumb below the raised rim of the entry slot. This ensures a stable grip that doesn't get in the line of the blade. With the other hand griping the knife handle line up and rest the blade edge in position on the slot. Apply gentle pressure pushing the tip end 1st into place, then pressing the rest of the blade down into position. You can slightly slide the last cm into place if necessary to ensure a tight fit as long as the blade tip remains inside the Guard by atleast 1cm but 2cm is best to be sure. •Removing the knife from the Guard - To remove it you basically reverse what you did to add the knife. Hold the Guard in one hand, grip with fingers and thumb. With other hand holding handle lift handle upwards in a hinge motion until the knife is fully removed, from handle to point. By following the above advice both your fingers and knife will not be damaged and the Guard will also remain in perfect condition. For reference the guards are also dishwasher safe if they require cleaning. Thankyou for reading my Full Review and if you've found it at all Helpful then please let me know.

Bought to protect the blade on my Wusthof Super slicer knife during transport to and from work, and my fingers getting them in and out of their travelling container. I already have other sizes of blade protector from this brand / seller and have been so happy with the sturdiness and longevity that I didn't hesitate to buy from them again. I made sure that I cleaned it inside before use (and kept it clean) and haven't experienced any scratches on the blade. The sleeve itself fits snugly over a blade (so that it doesn't just slip off) and the top edges are slightly angled to help with locating the blade when sheathing it - usual caution with sharp things obviously needed nonetheless. Would/will buy again

A must have for the sharp bread knife I bought from Amazon. Unfortunately I dropped it and it cracked about half an inch, so I cut a thin strip of duck tape to fix it and it hasn't got any worse. I have bought more since for my smaller chefs knives for when I go travelling. RH

I bought this to protect a knife I bought on holiday as there were no sharp knives available. The guard is a snug fit and covers the blade completely leaving the handle free. The guard stays in place during transit. It was a good price too. A modification the manufacturer could do is to make the lining a different colour, as anyone with less than perfect eyesight may find it difficult to insert the blade as it is completely black.

This knife guard is as solid and as robust as it should be to protect seriously sharp high quality knives. Inserting the knife into the guard is easy yet there is no play or slop once inserted. Very pleased with this guard and it gets an unhesitating five stars!

Fits my bread knife well. Well made, exactly what I was looking for.

Does the job but is very difficult to put on/take off on any knife thicker than 1 mm. The design focuses all the tension at the top of the sheath rather than near the blade which is what makes it so difficult.

Very good for their 10 inch bread knife. Strong and grips tightly. Protects you from the viciously sharp blade, and protects the sharp blade while not in use.

Good

Perfect height for sewing.

Cumpre o que promete. Material bem feito, segurando bem a faca. Satisfeito.

The product is as described; it's exactly what I was looking for. The item meets my needs, it arrived on time, I have no complaints, and I'm pleased with the purchase.

Good fit for my Mercer skinning knife. Good product, well made.