Chemical Guys ACC400 Ball Buster Wheel and Rim Polisher System, Safe for Cars, Trucks, SUVs, RVs, Motorcycles & More (Drill Attachment)

Love this, exceeded all expectations. Bought this to polish some black wheels and was using quite a bit of pressure. Total usage time was around 8 hours at hi speed and it still looks like new. Will buy a second one

I used this with a corded drill and it works good.I used it for applying wheel protection sealer on outside of wheels and because my wheel design was conducive to the size and shape of this product, I was able to apply the sealant to all exposed surfaces on face and in between spokes.I was able to push it through the spokes to get some onto dish of inner wheel, therefore this product saved me time and work from needless removal of wheels.Only one use so far but I would suggest to first clean wheels with alternative cheap sponge and using this for wax or sealant only on clean dry wheels, not as part of cleaning task.The sponge cellulose construction looks tightly made, as I noticed the wax sealer didn’t really soak in too much before flinging it out, and the variable speed on the drill was key to keeping things neat and conservative with the expensive sealer.I think this product is one of those items that you should get because it seems to fit with the other technologies presently in use without being overkill or one time and done. I will probably use this every time there is a break in the cold weather over the winter, and a few times the other seasons.There are some wheel designs this will not work on, keep that in mind, because the bottom line is it is a sponge not a polymorph material.

The tip can’t take a lot of chafing!Everything else is sweet!

It’s expensive!! But work’s awesome!! No regrets!

Really works good specially I have a 250 rear bullet aluminum motorcycle rim and I’m able to get all the way in to the center helps to shine

I have used this drill driven wheel polisher for several months and it is still performing very well. I would buy this polisher again.

Just got this in the mail and was so excited that I couldn't even wait until after dinner to try it out. Chucked it onto my cordless drill set it on fastest setting and off I go. I sprayed some wheel cleaner on the wheel and let it sit for a min and use this foam cleaner does it job.Within 10 minutes I was done with all 4 wheels and I have not clean them for almost 2 years. The results was good. In area where there is a lot of contact with the foam. It got clean easily and work very effective. But the corners where it form anything greater than 60 or more degrees, the foam just won't reach. It expand there and gentle brush away the surface dust but leaving behind the stain build up. Using my fingers and running back and forth a few time remove additional grinds, so I know this area isn't really being reach by the foam. All in all, I think this does a very good job and with very little additional work you can clean you entire wheel.As to durability and longevity, after four wheels there is already some tearing on the center, cleaning near the wheel stem where you add air does damage this, if your wheel has a lip, it does damage this. So I imaging using this 4 to 5 times is most I am going to get out of this.

works as it should, good fit saves time